Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Pipe Rudder
-
18th February 2005, 08:27 AM #1
Pipe Rudder
Planning:
From John Gardner's The Dory Book
Layout:
[b]Cutting and Fitting:[/]
Turning, Threading and Milling:
Fitting Drifts:
Pouring Lead:
Rudder blade shaped, sanded and strengthened with 4oz fiberglass cloth set in epoxy:
Continued….
-
18th February 2005 08:27 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
18th February 2005, 08:31 AM #2
Laminated tiller yoke laid out and mounting hardware installed:
Rudder thwart and rudder stock installed:
Rudder housing and shaft brazed:
Hardware bedded in epoxy and wood finished with varnish over epoxy:
Rudder assembled and tested for fit and function:
Then it all comes apart for final fit and finish waiting completion of the remainder of the boat.
-
18th February 2005, 01:53 PM #3
Nice job Bob
The only way to get rid of a [Domino] temptation is to yield to it. Oscar Wilde
.....so go4it people!
-
18th February 2005, 01:55 PM #4
Very nice Bob!
-
18th February 2005, 02:17 PM #5
Thank you again Bob for sharing with all of us another informative article. I really do enjoy reading your step by step process. "Well Done"
Regards
Al .
You don't know, what you don't know, until you know it.
-
18th February 2005, 03:31 PM #6
So whens the launch date?
Very good BTW.....................................................................