Thanks: 0
Likes: 0
Needs Pictures: 0
Results 1 to 8 of 8
Thread: Baladonia Guide Rail System
-
19th February 2016, 02:54 PM #1
Baladonia Guide Rail System
Has any one bought one of these Baladonia Guide Rail System?
Are they any good is the a better system out?
https://www.google.com.au/url?sa=t&r...q-UtiYmzyn9VfA
Ratty 05/2004 -05/07/2010 COOPER 01/08/1998-31/01/2012
-
19th February 2016 02:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th February 2016, 06:30 PM #2
No I have not used this system but have used other guide rails.
One of the draw backs is that it is great for cuts at 90 degrees from the edge where you clamp it, however it may not work at other angles.
You also need to know and allow for the distance from the rail to the edge of the blade. This will vary from saw to saw. It will help you to cut straight once you have it set up.
A track saw (eg Makita, Triton, Festool) could be a better way to go. Please note that apart from Festool they may not be easy to find in Australia or parts readily available.
Looking at your location you might consider making up a guide for your existing tools using MDF.
-
20th February 2016, 10:34 PM #3Those were the droids I was looking for.
https://autoblastgates.com.au
-
21st February 2016, 12:11 PM #4
dead easy to makeregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
21st February 2016, 12:38 PM #5GOLD MEMBER
- Join Date
- Nov 2012
- Location
- SE Melb
- Age
- 65
- Posts
- 1,278
If you're too lazy to make your own. You can always buy the Craftright 50" Aluminium Clamp And Cutting Guide | Bunnings Warehouse from bunnings.
-
21st February 2016, 01:44 PM #6
I have the Craftright jig, it's ok but can flex. I only really use it for rough cutting across whole sheets.
The type of simple jig that NCArcher linked to works great; I built one years ago for my Triton. Here is another version of the same idea but where the presenter isn't pitching it to a Shopping Channel audience https://www.youtube.com/watch?v=oiSz7kPwFY0
As for the quality of cut, only the dedicated guide rail systems like Festool that have the rubber finger edges will have any effect. Whatever system you use will likely need trimming afterwards. As an example when I cut melamine coated particle board I cut each edge 2-3mm oversize and trim with a router; that way I don't get any chipping.
On the same lines a tee-square is great for docking planks to length, this is just two batterns nailed together, one on top of the other and at 90 degrees to it. First time you use it the saw trims the short part to the cutting line. I made a pair for my jigsaw, left and right handed. I use them mostly for cutting rebates out of the bottoms of cabinets so the damn things can fit over skirting boards and lie flush against the wall.
-
21st February 2016, 04:02 PM #7
Thanks for your replies and links.
Timbecon has just lost a sale.
So simple to make.
Just looking an Burnings website for the AA grade mixed hardwood marine ply, the thickest is only 12 mm is the right?
I have a project I need 19 mm.
Ratty 05/2004 -05/07/2010 COOPER 01/08/1998-31/01/2012
-
21st February 2016, 06:19 PM #8GOLD MEMBER
- Join Date
- Nov 2012
- Location
- SE Melb
- Age
- 65
- Posts
- 1,278
You can also try this link 2400 Long Circular Saw Guide
Similar Threads
-
Guide Rail Retainer
By John Saxton in forum FESTOOL FORUMReplies: 3Last Post: 1st November 2009, 06:57 PM -
Guide Rail Bag
By lesmeyer in forum FESTOOL FORUMReplies: 2Last Post: 15th August 2009, 12:27 PM -
How fast to reposition the guide on the Festool circular saw guide system?
By Icestation2 in forum FESTOOL FORUMReplies: 12Last Post: 4th July 2009, 10:37 AM -
MFT guide rail pivots, etc.
By Afro Boy in forum FESTOOL FORUMReplies: 0Last Post: 23rd January 2009, 08:38 PM -
guide rail
By Sokolic in forum FESTOOL FORUMReplies: 9Last Post: 15th September 2007, 12:36 AM