Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 22
Thread: Makita Planer Inverted
-
18th November 2006, 06:57 PM #1
Makita Planer Inverted
I've read every post on jointing, without finding what I want.
Here's the story...
I don't have a jointer.
I have a Makita 100mm hand held planer.
I haven't used the planer for a few years and probably never will for its original purpose.
People who own jointers, and every mag article reckon they are the duck's nuts.
If I made the appropriate tables, and inverted the planer in a stand, would this perform the jointer function, albeit on a small scale????
It would probably help if I'd seen a jointer in action, but no such luck.
Most of my projects are on a small scale, so 100mm is not a problem. Yet!
Regards,
Noel
-
18th November 2006 06:57 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
18th November 2006, 07:03 PM #2Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
Danger Will Robinson, Danger.
Where is the safety guard that will save your fingers.
Al :eek:
-
18th November 2006, 07:29 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,815
I have done some "chrazzy sheet" in my shed, but invert a planer . . . . ??
.
.
.
.
.
.
Nah, I wouldn't do it.
-
18th November 2006, 07:42 PM #4
Holy crap!
That's one of the scariest ideas I've heard in a long time. :eek:
DON'T DO IT!
If you can't afford a buzzer then try and get an old Stanley #7 and do it by hand.
-
18th November 2006, 07:44 PM #5
Sell the planer, use the cash as a deposit on a 6 inch jointer from Hafco for around $450. http://www.hareandforbes.com.au/sample_2/home.php
This way you get a real jointer and keep your pinkies!
-
18th November 2006, 07:51 PM #6Member
- Join Date
- Aug 2004
- Location
- Newcastle
- Posts
- 87
Noel
Makita had an accessory to do that complete with guard as per jointer, I don't know if it's still available.
Mark
-
18th November 2006, 08:03 PM #7
G'day All again,
That's given me a real giggle.
I've never seen so many "DON"T DO IT!!" posts.
Thanks for that.
But, I just thought....rotary blades.... stable table......I didn't mention a "pink things" guard....and so on.
I must get a look at a going jointer, and then I'll stop asking stupid questions.
Sorry to have given you all a bit of a "hearty", but the mind keeps going "what if"???
Thanks all.
Regards,
Noel
-
18th November 2006, 08:06 PM #8Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
-
18th November 2006, 08:26 PM #9
Thanks for that Al,
I don't want to take up any more time, so I'll source somebody out here in the sticks with a jointer, and have a lookee see.
By the way, I'll be by your place in February, and I'll bring a bottle.
Regards,
Noel
-
18th November 2006, 08:31 PM #10Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
-
18th November 2006, 10:02 PM #11
Triton used to make an assessory that allowed you to use the plane on it's side.
however, safest way is a long straight edge, some chalk or a soft lead pencil and set the planner for a fine cut and only attack the high spots.
ian
-
20th November 2006, 09:49 AM #12
OK, fundamentally, that is all that a jointer is. There are two things that make it different 1. a fence against which to hold your board and 2. a spring-loaded safety guard that swings across to cover the blade.
I have done exactly what you are proposing. I did it once for a particular purpose but wouldn't make a habit of it. Once I got the Triton router table with the split fence, I didn't need to do it any more.
This is exactly how the Triton planer attachment works. It includes a blade guard though. Maybe you could buy one of them and mount it to your bench somehow.
Finally, it would be foolish to believe that the guard on a jointer protects you. You don't want to put your fingers anywhere near the blade, even with the guard in place. A jointer will do as much or more damage to your fingers as an upside down electric planer will.
-
20th November 2006, 01:16 PM #13GOLD MEMBER
- Join Date
- Aug 2005
- Location
- Queensland
- Posts
- 2,947
To repeat myself from a previous post..... simply for the safety aspect...
"I actually have the Makita 1100B which I treat with extreme respect. As part of the deal when I bought it [around 1979] it came with a stand which allowed the machine to be inverted and used as a jointer - only ever ran one piece through it in this fashion - young, bullet proof before - after, time for a serious reality check - very happy to be able to count up to 10"
I did not mention in the previous post that it did come with a swing away plastic guard and the existing fence for the planer is still able to be used - should someone wish to do so -- not me.
-
20th November 2006, 02:10 PM #14
inverted makita planer
Hi folks, it can be done, I've got one. Set in a mini router table sharing a fence. Picked it up at the swapmeet for $160 a few years ago. Real handy.
regards, Lionel.
-
20th November 2006, 02:59 PM #15
Any of our power tools are lethal if used ignorantly/foolishly/whatever. The tools aren't dangerous. Mind you the 6" jointer does make me concentrate, and I do not as a rule have my unprotected hands passing over the blades (grrrripper!)
If you're stuck for a jointer I do not see why this wouldn't work, with or without a guard. If executed properly, and used with respect, what is (any more) dangerous about this machine? I would question the usefulness, as the short bed would not joint much.
If you need it to flatten boards, search for this. I use the handheld planer and 3m straightedge to square up troublesome boards, ready for the thicknesser. Very quick, though not as much fun as the #40.The only way to get rid of a [Domino] temptation is to yield to it. Oscar Wilde
.....so go4it people!
Similar Threads
-
Makita Planer Service
By Billspin in forum HAND TOOLS - POWEREDReplies: 0Last Post: 7th September 2006, 01:44 PM -
Makita Slinding Compound Saw Clones
By sean@oz in forum HAND TOOLS - POWEREDReplies: 23Last Post: 10th April 2004, 10:09 AM -
Triton Planer Attachment Installation Update
By Dean in forum TRITON / GMCReplies: 18Last Post: 24th January 2003, 08:29 AM