Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Setting up a WDS400
-
2nd October 2004, 07:44 PM #1
Setting up a WDS400
I'll be finished setting up my DC sysyem in a few days so then I will fire up the WDS 400 drum sander.
2 questions about the sander
1. The main job is thicknessing veneer to about 1mm.
Is there any way of preventing a booboo and inadvertently lowering the drum into the conveyor?
2. Is a 4" to 2.5" adaptore suitable for the dust extraction or should I modify the sander to take a full 4" hose?
-
2nd October 2004 07:44 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd October 2004, 07:53 PM #2
Reducing the air flow will REALLY slow the air flow!!!!
I use a reducer 2.5" to 4" reducer on my DeWalt bandsaw & it's next to useless so if you can install a 4" outlet on the machine.
I've got a Carba-Tec 25" WDS & I'll change the twin 4" outlets to 5" when I finish setting up my DC system