Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 26 of 26
Thread: more curves than a dogs back leg
-
9th June 2010, 06:24 PM #16
poorly maintained saw and a pisspoor operator I would say. how long ago was it cut? has it been sitting stickered?
I am told that sharpening handsaws is a dying art.... this must mean I am an artisan.
Get your handsaws sharpened properly to the highest possible standard, the only way they should be done, BY HAND, BY ME!!! I only accept perfection in any saw I sharpen.
-
9th June 2010 06:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th June 2010, 08:47 PM #17
is that accross the cut or along it?
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
-
10th June 2010, 09:12 PM #18
The last time I saw curves like those the missus slapped me
-
10th June 2010, 09:28 PM #19SENIOR MEMBER
- Join Date
- Jan 2009
- Location
- Busselton, WA
- Posts
- 708
-
11th June 2010, 01:00 AM #20
a good result so far
Thanks everyone for input and thoughts.
I did think the sawing was not up to scratch and everyone has had a similliar opinion that backs up my thoughts, recieved a positve email back from the mill today, they want to work something out, replace the lost timber the manager was not aware of the bad job done by the sawyer, very apologetic, the sawyer no longer works for the mill anymore and the bandsaw that was used is now retired.
Stickering was not the cause of the curves, timber is too thick over too short a distance, a 1" board, yeh....
Carl, not sure what u are asking, but the pics are of a board/s that I have cut from a slab that I have then turned on its edge, it really makes the blade wander standout.
Pete
-
11th June 2010, 08:50 AM #21
Well thats not so bad.
Regards Ben
-
11th June 2010, 07:13 PM #22I am told that sharpening handsaws is a dying art.... this must mean I am an artisan.
Get your handsaws sharpened properly to the highest possible standard, the only way they should be done, BY HAND, BY ME!!! I only accept perfection in any saw I sharpen.
-
16th June 2010, 02:26 AM #23SENIOR MEMBER
- Join Date
- Jan 2009
- Location
- Busselton, WA
- Posts
- 708
So PJT is that bandsaw for sale? Please pm the website of the owner.
-
1st July 2010, 12:34 AM #24
I reckon this pic shows what Al is talking about here...
Attachment 140833
the sawyer at a guess has been pushing and it has resisted as the blade has dived off, I know with mine that it will get to the point it just aint gonna go any further and if u persist u are trying to then trying twist the blade further away from a straight cut.
Pete
-
3rd July 2010, 11:49 PM #25
yes I agree what sigidi is trying to express and what you have encountered with your huon are 2 different things and it is most definetly due to the way it has been sawn. I will get some pics of some blackwood which is very similar but not as bad as what you have there. It is a common thing with bandsaws and is caused by a couple of things including incorrect setting of the blades but most commonly blunt blades.
I am told that sharpening handsaws is a dying art.... this must mean I am an artisan.
Get your handsaws sharpened properly to the highest possible standard, the only way they should be done, BY HAND, BY ME!!! I only accept perfection in any saw I sharpen.
-
4th July 2010, 09:53 AM #26timbermill
- Join Date
- Jul 2009
- Location
- perth western australia
- Age
- 53
- Posts
- 34
bad cut
Hi all i run a forrester mill myself and when i see cutting like that on a forrester it could be a couple of things blade tension,blade guides on machine not adjusted,not the right tooth angle on blade,very blunt blade or pushing it to much trying to cut to fast. mine cuts for about 9 hours a day 6 days a week never had a prob like that doesnt matter what type of wood cut a heap of dry wandoo and tuart the other day not a prob at all.thanks regards
Chris
Similar Threads
-
Curves and Bends
By jacko in forum WOODWORK PICSReplies: 26Last Post: 31st October 2012, 04:52 PM -
planes for curves
By HUON in forum HAND TOOLS - UNPOWEREDReplies: 6Last Post: 12th January 2008, 07:49 PM -
drawing curves
By Redback in forum WOODWORK - GENERALReplies: 8Last Post: 27th May 2005, 10:51 AM -
french curves.
By ptc in forum HAND TOOLS - UNPOWEREDReplies: 10Last Post: 2nd August 2004, 12:26 PM -
Squares over Curves
By jacko in forum WOODWORK PICSReplies: 8Last Post: 6th November 2003, 11:13 PM