Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 19
  1. #1
    Join Date
    Apr 2006
    Location
    Brookfield, Brisbane
    Posts
    5,800

    Default holden utes cant go everyware.

    not really a milling thread but it happend wile i was milling at coomera.

    so i have a holden rodeo 4wd that is pretty unbeatable.

    a we were driving around looking saplings for chair legs when one gully looked to wet to cross. so guy says ill just drive around the end (he was driving for some reason). so i got out and had a look and told him there is know way itd make it accross. he decided it would and went for it before i could stop him.
    Attachment 107493
    well needless to say he didnt make it the bulbar was sitting against a stump in teh creek witch was latter reveled to be 2 feet deep even thow it is only a foot wide. with the back on the bank sticking up in the air.
    Attachment 107494
    and who do u think had to stip down to his jocks to try and jack under teh wheel (me). with no winch or even a shovel we managed to get it out by diging the stump out with a crowbar and using chains and load binders as a winch. it was 2 hours of hard work.
    Attachment 107495there are 3 lesons to learn form this.

    1. creeks may be deeper than they are wide.
    2. 4wd dosn't mean it can go anyware.
    3. when teh owner a a vehicle says its not gunna make it then dont drive oit into the creek.

    www.carlweiss.com.au
    Mobile Sawmilling & Logging Service
    8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Sep 2008
    Location
    Werribee, Victoria, Australia
    Posts
    290

    Default

    Where is your sense of adventure??

    In my cousins old jeep, down a gully across the stream and up the other side, that was the plan, got to the creek bit and when the water went over the bonnet and poured in the vents, that is when we figured we were in trouble. Similar thing creek was only about 8 foot across but was about five feeet deep, oops.

    Yes yes I know about checking depths before you do stuff.
    "Rotten to the Core"

  4. #3
    Join Date
    Jun 2007
    Location
    Toowoomba, Qld
    Age
    31
    Posts
    2,520

    Default

    and who do u think had to stip down to his jocks
    "Okay Guy, I'm gonna need to go commando on this one"
    "Say What?"
    "Nuddy"
    "No way"
    "Okay how about just undies"
    "Someone poke my eyes out"
    "Just remember to take a picture for the forum!"

  5. #4
    Join Date
    Apr 2006
    Location
    Brookfield, Brisbane
    Posts
    5,800

    Default

    you shoulda sen teh otehrones he took

    he was having a great old time.

    www.carlweiss.com.au
    Mobile Sawmilling & Logging Service
    8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.

  6. #5
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default

    the 4th lesson is always carry a comealong
    Regards, Bob Thomas

    www.wombatsawmill.com

  7. #6
    Join Date
    Apr 2006
    Location
    Brookfield, Brisbane
    Posts
    5,800

    Default

    yer the turfur was back home. i wasnt expecting to be driving into a ditch.

    www.carlweiss.com.au
    Mobile Sawmilling & Logging Service
    8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.

  8. #7
    Join Date
    Apr 2005
    Location
    Nerang Queensland
    Age
    66
    Posts
    10,766

    Default

    Neil
    ____________________________________________
    Every day presents an opportunity to learn something new

  9. #8
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    64
    Posts
    13,364

    Default

    Au contraire! Holden utes can go everywhere... it's just that they may not get out again!
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  10. #9
    Join Date
    Apr 2006
    Location
    Brookfield, Brisbane
    Posts
    5,800

    Default

    well it did get out agin with a little help.

    its now sitting here coverd in mud counting down till retirement.

    www.carlweiss.com.au
    Mobile Sawmilling & Logging Service
    8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.

  11. #10
    Join Date
    Mar 2009
    Location
    Coffs Harbour
    Posts
    185

    Default

    That looks like the ditch I crossed in the Hilux yesterday, no worries

  12. #11
    Join Date
    Jun 2003
    Location
    Gatton, Qld
    Age
    48
    Posts
    3,064

    Default

    Geese Carl my two wheel drive "donkey" could've crossed that!!! what ya playing at? You just didn't want to mill
    I love my Lucas!! ...just ask me!
    Allan.

  13. #12
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    16,794

    Default

    The Holden that couldn't cross a Fjord sorry Ford

    Carl's new story I Can't Jump Puddles

  14. #13
    Join Date
    Apr 2006
    Location
    Brookfield, Brisbane
    Posts
    5,800

    Default

    only 2 days left untillteh old girl is just a knock around ute. and just as well the bul bar is verry bent from teh chain hooked on the only place above the mud. and the fuel injecta pump started pising out deisel today from around the seal used over 15 litres to travel 10km.

    www.carlweiss.com.au
    Mobile Sawmilling & Logging Service
    8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.

  15. #14
    Join Date
    Feb 2004
    Location
    kuranda north qld
    Posts
    717

    Default

    Mate the rules of my truck are you bogged it you get it out!!! ill put the billy on and watch . sometimes works???, glad you rescued it cheers bob

  16. #15
    Join Date
    Apr 2006
    Location
    Brookfield, Brisbane
    Posts
    5,800

    Default

    i need a label on the dash "you got it in you get it out".

    tere is no way one person could have got it out.

    www.carlweiss.com.au
    Mobile Sawmilling & Logging Service
    8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.

Page 1 of 2 12 LastLast

Similar Threads

  1. FJ Holden
    By Groggy in forum SCALE MODELLING
    Replies: 13
    Last Post: 3rd February 2009, 11:27 AM
  2. Holden/wasp guitar amp
    By black_labb in forum HI FI EQUIPMENT
    Replies: 4
    Last Post: 13th November 2007, 02:20 PM
  3. Holden Fan
    By Mr woodmachinist in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 43
    Last Post: 15th May 2006, 04:46 PM
  4. Damn Cars (or Utes in this case)
    By Wood Butcher in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 19
    Last Post: 1st October 2005, 05:15 PM
  5. FORD V holden
    By ozwinner in forum POLLS
    Replies: 15
    Last Post: 8th September 2003, 05:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •