Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: timber for a kitchen?
-
23rd September 2011, 04:26 PM #1New Member
- Join Date
- Apr 2011
- Location
- Medlow Bath NSW
- Posts
- 9
timber for a kitchen?
My first post but I've been lurking and reading for a while - very interesting.
I'm about to build a home and want to make the kitchen myself (I have a little experience behind me including some renovations and some simple joinery).
I'd prefer to build the kitchen cupboards and drawers from 2nd hand timber.
I don't know much about Australian timbers and want to ask advice about a good timber to use. I'm prepared to do a certain amount of re-sizing myself to make the timber work.
I like the really old Australian colonial kitchen tables (I think they used to call it "Australian pine" or similar but it's not radiata). This was a relatively light coloured (honey) timber. I don't think it was a eucalypt or was very hard (but harder than say red cedar). I know they used an Australian timber for this furniture and it's now very expensive to buy tables made like this. Can anyone tell me what this timber might be called now? I think it would make a beautiful kitchen.
Otherwise any other good native timber - any ideas?
Many thanks!
Lucas
-
23rd September 2011 04:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd September 2011, 04:53 PM #2
Hi Lucas,
If it is pine in an colonial Australian kitchen table, two contenders would be Hoop pine and Kauri pine. There are others it could be, but they are probably the only two which would be easy to track down reclaimed timber in large enough quantities to build a kitchen these days. Also there are numerous commercial outlets for new 'hoop pine' laminated panels which would also be useful for building a kitchen. It is often sold as aracaria and may or may not come from Australia or South America. Bit softer than old growth stuff.memento mori
-
23rd September 2011, 11:56 PM #3
Could be plain old baltic pine too
....................................................................
-
24th September 2011, 09:01 AM #4GOLD MEMBER
- Join Date
- Feb 2005
- Location
- Sydney
- Age
- 75
- Posts
- 1,387
Check the threads on kitchens
One member made his from Norther Silky Oak
Hoop would be better than Kauri as it's a bit harder I think
Greg
-
24th September 2011, 10:33 AM #5New Member
- Join Date
- Apr 2011
- Location
- Medlow Bath NSW
- Posts
- 9
Thanks everyone - I'll keep an eye out for those timbers at auctions etc. sounds like Hoop Pine might be the best if I can find any. I replaced a section of the baltic pine floor in the house we live in (built 1912) and it was a nice timber but did seem very light and not very hard (easily dented). beautiful wide 150mm boards though.
I'm in the Blue Mountains and will watch out for the auctions at Windsor and on eBay. Any other thoughts on good places to watch?
Thanks again for the advice.
-
24th September 2011, 11:34 AM #6
There is also Bunya pine it makes nice tables and furniture
-
28th September 2011, 11:38 AM #7Novice
- Join Date
- Apr 2009
- Location
- Caboolture
- Posts
- 16
Sorry LucasT, I don't think this is what you have asked for but I can't help myself.
I'm only a new commer to working with wood compared to a lot of people in these forums.
My favourite timber to work with is Huon Pine and it was popular in furniture making years ago, particularly in Tasmania. Kitchens and tables are beautiful in this timber.
I think this timber may prove hard to get second hand and it was expensive to buy new a few years ago.
-
28th September 2011, 12:58 PM #8New Member
- Join Date
- Apr 2011
- Location
- Medlow Bath NSW
- Posts
- 9
no worries - I'm relatively new to this too - and I also like Huon Pine. At least I now have a few ideas about some timber to keep an eye out for at the auctions and timber yards.
I suspect being in NSW I'll be looking for Hoop Pine or some old Kauri if I'm lucky.
Next job is to work out roughly how much I'll need and then I'll start looking more seriously.
cheers
-
28th September 2011, 02:35 PM #9GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,565
Kauri pine was used extensively for kitchen furniture and also butchers blocks as it possesed antibacterial properties within its resin.
-
29th September 2011, 12:17 PM #10Novice
- Join Date
- Sep 2011
- Location
- Adelaide
- Posts
- 20
I think your best bet for recycled boards is baltic pine, should be easy to find and looks great in the kitchen. Even recycled boards can be pricey though, shop around salvage yards and check auction listings.
Similar Threads
-
timber kitchen benchtop
By LeonieB in forum FINISHINGReplies: 16Last Post: 24th March 2008, 11:01 AM -
Timber Kitchen Bench
By adrian in forum WOODWORK - GENERALReplies: 11Last Post: 28th April 2006, 12:45 PM -
A timber kitchen
By Repete in forum WOODIES JOKESReplies: 1Last Post: 11th April 2006, 08:20 AM -
Finishing a timber kitchen.
By fcooma in forum FINISHINGReplies: 2Last Post: 5th November 2003, 10:35 PM