Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
-
8th June 2010, 11:04 AM #1
Wattle used for interior furniture
G'day chaps
We clear a lot of wattle at our place, but it's usually only used for firewood. I know it's got lousy rot resistance, but I wonder how it would fare for interior furniture. I'm thinking of a desktop chiefly. I've messed about with a few smaller pieces (shelves, racks and such), but these have only been sitting around for six months or so, which isn't much of a test.
Has anyone got any thoughts or experiences they can share?
-
8th June 2010 11:04 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th June 2010, 11:51 AM #2" making wood good"
- Join Date
- May 2008
- Location
- Hervey Bay QLD
- Posts
- 319
It should be fine as long as ity been dryed to around 12 -14% MC i think its lovely stuff
-
8th June 2010, 12:25 PM #3
It has got some lovely looking grain swirls, which is what got me thinking in the first place. Cheers.
-
8th June 2010, 10:55 PM #4
Its beautiful stuff silver wattle, some stunning colours to it. Its a shame that its never caught on as a furniture timber. Many years ago well before i got into woodworking i saw an entire bedroom suit done in wattle for sale, always caught my eye. A friend of mine who has it as wall paneling in his house, said that the CSIRO tested it & found that it has one of the lowest percentages for movement once properly dry. The paneling was cut to 10mm thick & has been up for a few years now without any movement or cracking visible. I plan on using it myself just as soon as the local mill can get onto a good patch.
I've been using it as turning practice timber, i cut it green off our block then straight onto the lathe. I've been quite surprised how stable it is once turned. I turned the bowls quite thin & finished right from green, there's been little movement in them & only 1 crack right on a knot.
The really good thing with wattle is that they grow so fast straight & often don't live past 25 yrs before falling over so they are very much sustainable. Usually they are the first trees to pop up after a block has been cleared.
-
18th June 2010, 08:06 PM #5
silver wattle is acctually noted as a furniture timber in a number of publications, however it is not as desireable as many of the other acacia species, such as in comparison to its cohabitant blackwood. I have cut quite a bit of it and when dry it is a tremendously hard timber. It can be difficult to work suffering grain tear and the like and despite it being resistant to warping once dry it often does warp considerably while drying. It was once renowned as packing box timber as it is quite strong and thin pieces will yield a higher strength and resistance to fracture than things like pine even when these are cut to a considerably larger dimension, thus making crates strong light and more compact. Although it is not one of my favourite timbers it does have its place.
I am told that sharpening handsaws is a dying art.... this must mean I am an artisan.
Get your handsaws sharpened properly to the highest possible standard, the only way they should be done, BY HAND, BY ME!!! I only accept perfection in any saw I sharpen.
-
21st June 2010, 09:12 AM #6
-
23rd June 2010, 08:33 PM #7
the silver wattle ive used is almost the excact opposite of what youve described here travis ,softer than blackwood ,ive had no problems drying it and once dryed extremely stable and easy to use ,its just a lot blander than blackwood ,youre not thinking of black wattle are you ?
-
24th June 2010, 08:58 AM #8
Cheers chaps. I'm pretty sure it's mostly silver wattle. I have noted that Blackwood trees don't look completely dissimilar—definitely one of those trees that's hard to excited about before you know what's inside.
-
4th July 2010, 12:07 AM #9
NO I am not, and most of what I have used has come from altitudes higher than blackwood or black wattle will happily exist. I most definetly know what silver wattle is and if you really want I can take some pics of the timber. The DENSITY of silver wattle is not extremely high but when dry the HARDNESS of the timber and abrasiveness of it are much higher. Yes as a rule the overall effect is softer than blackwood and yes the colour can be quite bland (generally a pinkish colour hard grain with a slightly yellower softer section of the grain.) I use it as wedges for axe handles as for this it is very good. The grain is quite plain but the plainness can make it interesting. And yes once dried it is extremely stable but what I have cut and dried has suffered from distortion during drying, generally twist, but this could have been a bit due to lazyness on my behalf, but it has distorted more than other timber I have cut. I as said find that it also suffers from grain tearing as do most of the acacia species until extremely dry, I say this in comparison to things like redgum, and other timbers which tend to take to planing at much higher moisture contents without tearing. As far as a timber goes I would not knock it and if I could get hold of a decent amount of decent sized pieces of it I would find some very good uses for it.
I am told that sharpening handsaws is a dying art.... this must mean I am an artisan.
Get your handsaws sharpened properly to the highest possible standard, the only way they should be done, BY HAND, BY ME!!! I only accept perfection in any saw I sharpen.
-
4th July 2010, 08:55 AM #10
Silver Wattle
Just mentioning that there are a number of acacias that are commonly called Silver Wattle,these include Dealbata,neriifolia,retinodes,rivalis,and o'shanesii to name a few,hence using common names can be confusing.Always helpfull when the tree's provinance is disclosed,as this will greatly help with it's identification.Cheers
Mapleman
Similar Threads
-
Wattle. Useful or not.
By STAR in forum WOODWORK - GENERALReplies: 10Last Post: 1st January 2008, 12:18 PM -
Wattle be next
By ozwinner in forum PHOTOGRAPHYReplies: 24Last Post: 24th October 2007, 04:15 PM -
Cooper Wattle
By bdar in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 30th July 2007, 12:12 AM -
wattle
By weisyboy in forum WOODTURNING - GENERALReplies: 9Last Post: 22nd July 2006, 09:37 PM -
Black Wattle
By ubeaut in forum TIMBERReplies: 0Last Post: 20th August 1999, 06:42 PM