Thread: Saw Stabilizing Bracket

No, the saw stabilising bracket is used if your chosen saw is not terribly rigid on its base plate. I.e. if you hold down the base plate and then grab the motor part of your saw and try move it up and down and it has a lot of play in it, then the saw stabiliser bracket will indeed help reduce that to give more accurate cuts.

It basically makes your saw more rigid in the workcentre if it is not rigid enough on its own.

Waco, I have an old makita 9000 series in my Mk 3, and the stabilising bracket made a hell of a difference. Go for it...



Johnno 2

would this Stabilising Bracket make any diff with a triton saw? im sure the triton is pretty stable but would the bracket make it more so?

When I bought the work centre I had a 91/4' Makita and it was all over the place so I purchased the stabliser bracket and it made a huge difference to the saw as it took the flex out of the base plate.

The only problem after that was the Makita had arbour float and it affected the accuracy of saw cuts so I ended up buying the Triton saw and all my problems went away. You definitely don't need the stabiliser bracket with the Triton saw.

Guys, if he hasn't solved the problem by now, he never will

Gumby

Didn't look at the date of the original post but at least it gives an answer to Charcoal who posted 6 hours ago.

I don't know why they don't do a search or at least make a new post instead of digging up a thread that is two years old.

Originally Posted by Barry_White

Gumby

Didn't look at the date of the original post but at least it gives an answer to Charcoal who posted 6 hours ago.

I don't know why they don't do a search or at least make a new post instead of digging up a thread that is two years old.

Yeah mate, I've done the same myself.

Originally Posted by Barry_White

I don't know why they don't do a search or at least make a new post instead of digging up a thread that is two years old.

Don't go too crook on Charcoal for using an old thread as at least he did a search instead of others who post without checking if it was dealt with say a week earlier. Give him credit for searching.

Maybe he doesn't know yet on how to start a new post.


Peter.

[QUOTE=Sturdee]Maybe he doesn't know yet on how to start a new post./QUOTE]
First you dig a little hole and put in a seed and wait, and wait, and wait etc.

Waco
Don't hesitate buy the bracket.
The main reason is that while it is great to stabilise the saw it is even better to use when making fine adjustments to the blade angle when yo want to saw at other than 90 degrees
Cheers
HarcX