Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
7th July 2005, 02:25 PM #1Novice
- Join Date
- Jul 2005
- Location
- singapore
- Posts
- 14
How to peel off outer layers of plank
Hi everybody,
In my work place, I wish to re-use those planks that my company throw away. The planks are used to transport goods using forklifts. The size of these planks are about 3ins x 3/4in x 36inches.
To re-use these planks, I need to scrap off the outer layers of these planks so that they look new again. Of course I can scrap off these outer layers using sandpaper or files but it is too tedious. Are there any other more productive ways of "peeling" the layers off?
Thank You
-
7th July 2005 02:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th July 2005, 02:58 PM #2
Get a thicknesser or jointer
If you don't know what these are or havent seen either one in action try google or the search engine within the forum itself and you will get plenty of great information
The trouble with life is there's no background music.
-
7th July 2005, 03:11 PM #3
Maybe living in Singapore you won't be able to use a thicknesser!! :eek:
They are pretty loud and if you used them on the ground floor of your apartment block they are pretty messy too!
Perhaps you should use a simple hand plane, you can do a lot of research here or elsewhere on the web, but if you are going to make stuff, you'll want one anyway.
Try something like a #4 or #5 in size, either in a traditional asian style or a western (Stanley) type (or wait till I'm corrected)
Have a poke round http://www.leevalley.com/wood/page.a...&cat=1&p=41182 for a mind boggling collection, but you'll probably find something like this http://www.leevalley.com/wood/page.a...=1,41182,46334 available locally?
Let's see what others reckon now!
Cheers,
P
-
7th July 2005, 03:15 PM #4
Whatever you use, be sure to remove all nails and pieces of metal from the boards before you dress them. These often have small pieces of metal, filings, wire etc embedded in them and they will make a mess of plane or jointer blades real quick.
Nevertheless, you may be on to a cheap source of good timber, so go for it.
-
7th July 2005, 03:25 PM #5
-
7th July 2005, 03:31 PM #6Originally Posted by bitingmidge
You might also look at a hand held belt sander, then you don't have to worry about the nails , metal and stones quite as much
The trouble with life is there's no background music.
-
8th July 2005, 10:08 PM #7Novice
- Join Date
- Jul 2005
- Location
- singapore
- Posts
- 14
Many thanks to everyone here for the help. I forgot to say that I prefer using machines to do the job because there are many planks to work on.
Therefore a thicknesser or jointer or held belt sander as suggested by Ashore is the thing I am looking for.
I did a google search as suggested and I saw this thicknessers selling for $300 onwards (US dollars I suppose). http://www.amazon.com/exec/obidos/tg...083298-1584028 I cant use this in my HDB flat (apartment) in Singapore because its too noisy as pointed out by bitingmidge, so I am thinking of using this somewhere else.
I am also very impressed by this Ryobi AP13 Planer / Thicknesser when I did a search in google http://www.onlinetoolreviews.com/reviews/ryobiap13.htm
Since I am a beginner and doing this for hobby, I will get a hand held belt sander.
Thanks