Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Plane Identification
-
22nd May 2010, 09:28 PM #1New Member
- Join Date
- May 2010
- Location
- staffordshire
- Posts
- 2
Plane Identification
Hi Guys
I just wondered if anyone can give me a bit of infomation about this following plane
I have no idea about it...
Just been handed it to see what it is and is it worth selling?
Thanks
-
22nd May 2010 09:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd May 2010, 01:33 AM #2
It is an infill plane and they are worth a bit. I could not make out the mark on the blade but that kind of plane is lusted after by woodworkers and collectors. As to how much it is worth I cant say for sure. Could be late 19th to early 20th centuary. Your question "is it worth selling". My answer "it is worth keeping".
Regards
John
-
23rd May 2010, 07:25 AM #3
It worth nothing and it looks like it being used as a paper weight in your office. You can send it to me and ill dispose of it properly
"All that is necessary for evil to succeed is for good men to do nothing"
(Edmund Burke 1729-1797)
-
23rd May 2010, 08:53 AM #4Senior Member
- Join Date
- Jan 2009
- Location
- The Shire
- Posts
- 325
Kiwioutdoors has made you very generous offer, but postage to NZ is greater than it is to Sydney, Australia. Why not save yourself a quid and send it to me instead? I'm more than happy to help divest you of this piece of old tat...!
Cheerio,
Virg.
-
23rd May 2010, 09:17 AM #5Jim
- Join Date
- Feb 2008
- Location
- Victoria
- Posts
- 3,191
But I will make sure it is disposed of in an environmentally friendly manner
Cheers,
Jim
-
23rd May 2010, 09:40 AM #6
If you can give us the name and details it may help, your photo isn't quite clear enough to get the name etc. As for worth, other than the very generous offers above, if you have the name do a google search and you should find some in tool sales sites or auction houses. Some of the old Noris planes and others bring over $500 (AU) No doubt some of our plane buffs will have more accurate estimates. Stay tuned.
-
23rd May 2010, 10:13 AM #7
Is that an omega symbol on the blade?
faverollehen; If you could write out what the marks are on the blade that might help people....I've already guessed the words "Patented Warranted"
I know it's hard to get good close-up shots of old markings on steel, I've tried.
I'd agree that it is worth keeping, very nice.
And welcome to the forum, what a great first post.
We don't know how lucky we are......
-
23rd May 2010, 01:34 PM #8
Welcome,
The plane is very much in the Scottish Smoother style, that treatment at the front lower edge is one clue, as is the feature on the side plate adjacent to where the blade should be sitting. It would be of benefit to see the plane with the blade and wedge under the bridge as it should be when set for use. It is possible there is a maker's name stamped on that part of the plane. There are a few quite rare commercial Scottish maker's whose planes are very collectible. Many also were made by users who purchased blade sets and cast bodies then made the wooden parts and finished the plane themselves.
The blade is by T. Ibbotson & Co, and is usually a good blade to have.
Wedged planes are usually considered early, ( say pre 1870's) and were "improved" with a lever cap and screw for fixing the blade. But a user who preferred that style over the screw lever cap may have made one because they weren't as easily purchased as the Improved style with a the brass or gunmetal lever cap.
As to whether it is worth selling, that question can only be answered by the owner. I have plenty of tools that are worth $2 - $5 and I put them out for sale at swapmeets, and I had planes priced over $1000 at the same swap meet...there will be as many different reasons (or more) than there are people, for deciding what is worth selling and what is worth keeping...or giving them away...as sometimes happens.
Regards,
Peter
-
23rd May 2010, 08:06 PM #9New Member
- Join Date
- May 2010
- Location
- staffordshire
- Posts
- 2
Thanks for all your help
so here go's...
So on the long blade that cuts there is THOS IBBOTSON & CO & WARRANTED CAST STEEL
On the short blade WN MARPLES AND SONS...
-
24th May 2010, 01:00 AM #10
Blades and chip breakers sometimes get replaced on old planes. The main question is who made the body. Are there any marks on it. Your plane is still a good old plane and probably worth a bit but would fetch more if all the parts can be demonstrated as origonal.
Some blade makers supplied to lots of toolmakers. Marples is still around as a toolmaker and may be the maker of the body also. There must be some tool nerds over there that can have a stab at it. Try the UKW :: UKworkshop.co.uk .
All I can say is it is a good old plane and I would give it space in my shed any day.
regards
john
Similar Threads
-
Stanley Block Plane Identification?
By STAR in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 22nd May 2010, 10:19 PM -
Help- compass plane identification
By David1945 in forum HAND TOOLS - UNPOWEREDReplies: 4Last Post: 20th January 2009, 05:50 AM -
Identification please
By Robomanic in forum TIMBERReplies: 11Last Post: 30th November 2008, 11:37 PM -
Block plane Identification
By kiwioutdoors in forum HAND TOOLS - UNPOWEREDReplies: 6Last Post: 16th April 2008, 10:21 PM -
Plane identification help
By johnmc in forum HAND TOOLS - UNPOWEREDReplies: 1Last Post: 2nd December 2004, 04:35 PM