Thread: The Second Stanley Plane Blade Order

Mick I have added a spokeshave to your order. The price is $47.

Hi Helmut,
I'd like some of the wider sections from the skeletons between the blade cutouts. Basically the top 100mm or so of the front skeleton sheet in the pic, keeping the larger section in the top left corner intact. I'd like some of the narrow sections between blade cutouts too; they look about 3.5mm square in the pic.

Any chance of getting it heat treated too?

Thanks,
Brett.

Edit: Like in this pic:
Attachment 151175

Helmut please put me down for another 2 3/8 blade and chipbreaker set

I just saw that I still owe $27 - buggered if I know how I got the sums wrong - but you will understand why I measure more than twice and cut once

Money on its way

Neil

brontehls I have update your order.

Originally Posted by thumbsucker

Mick - For every blade you order you get one heat treated cut out.

Pardon my ignorance but what do people use them for?

Originally Posted by haggismuncher

Pardon my ignorance but what do people use them for?

Marking knife and knives.

Thanks, Helmut. You are very generous with your time. The $ is following in a minute.

If any of you are buying a 2 5/8 blade & cap iron for your Record 08, I can think of a couple of good homes oversees for your old Record set. I'll post in Marketplace.

I did not realize we could get extra bits for marking knives. It's about time I made a proper pair.

Rob

Sorry to be annoying, ive been searching for the payment account details and know i have seen them somewhere but can't find them. Might be worth posting again to help others as well. Also TS were you after postage details yet or is that to be organised later?

Cheers

Ash

Ash I will send you the payment details by PM.

A blade comes to $47 and the cap iron with screw is $15.

Hello Helmut,
I have just noticed that the 2-5/8" blades are a non starter.
I wanted one of these and one 2-3/8" The 2-3/8 was just there to pad out the order. Since there are no number 8 sized blades being made I'll offer my one copy of a 2-3/8" blade for someone else.
Thanks anyway.
Cheers
SG

SG the 2 5/8" blades are going ahead. Their is non left. I only offered Volute two of my 2 5/8" blades. Volute has not taken up my offer if you want a 2 5/8" blade from me, you are welcome to it.

Originally Posted by thumbsucker

SG the 2 5/8" blades are going ahead. Their is non left. I only offered Volute two of my 2 5/8" blades. Volute has not taken up my offer if you want a 2 5/8" blade from me, you are welcome to it.

OK I must have missed that in the fine print.
Thanks Helmut. I only want the blade and not the cap-iron as it won't fit the transitional I want to use it in. Same for the 2-3/8 blade - no cap iron as it is going in a Stanley 29.

Regards
SG

SG

I checked my records and you were down for one blade at 2 3/8" and one at 2 5/8". No cap irons.

So we do not need to change anything.

We still have following blades with matching cap irons for whom good homes need to be found for:

• 2 @ 2" Wide Blade suitable for No. 4 & 5 Bench Plane
• 3 @ Spokeshave blades
• 5 @ 2 3/8" Wide Blade suitable for No. 4 1/2 & 6, 7 Bench Plane

We also have extra cap irons with screw:

• 1 extra @ 1 3/4" Cap Iron
• 2 extra @ 2” Cap Iron
• 1 extra @ 2 1/4” Cap Iron
• 2 extra @ 2 3/8” Cap Iron
• 2 extra @ 2 5/8” Cap Iron
• 1 extra@ 2 3/8” Rebate Cap Iron

Originally Posted by thumbsucker

SG

I checked my records and you were down for one blade at 2 3/8" and one at 2 5/8". No cap irons.

So we do not need to change anything.

Cool!