Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 20
Thread: Xmas came early part 1
-
8th November 2007, 07:42 PM #1
Xmas came early part 1
My wife and I were expecting a child a few months back (sadly we lost it) so when I found out I was (almost) going to be a dad I immediately put in a few orders to Lee Valley for a bunch of hand tools knowing I wouldn't have a chance again for another 20 or so years. The pic show the first installment of veritas tools that came today. There's a couple more in transit to avoid duty and taxes. I've always been planning to replace the "collectible" tools I have with modern stuff. Once everything has come in I'll post the tools that have been replaced forsale. I was worried this parcel would get "lost" as I forgot to put the post code or the state I live in on the mailing address. Good on ya Aus post it arrived safe and sound.
In the pic is the Veritas scrub plane, scraper shave, pull shave, the add-on tote for the veritas block plane, left and right edge planes, concave spoke shave and last but not least a double mandrel with ball bearings.
I already have the mandrel but wanted a second as it's the best one I've ever found and wanted to make sure I have an extra one. It's one of those things you kick yourself over when it's discontinued and you need it. So it'll probably get stored away till I find a use for it or the other one wears out.
I had already ordered the left and right edge planes but when Lee Valley introduced the collectible version I had to have one so now I have three LOL. So now the stainless one will go back in the box to be sold at some later date at a ridiculously inflated price. I have a Stanley 95 but that things a pain in the ???? compared to these little beauties.
I've had a Record 311 for many years but since I first held the veritas bullnose I knew the records days were numbered. It's by far the best one available.
The pull shave and the scraper shave are two of those tools that when you see them you know they'll come very much in handy one day...
And ever since I saw Teejay's tote for his block plane I new I was getting one. It's the perfect answer for a very versatile plane, much better than the bob tail alternative.
So hopefully the other boxes will be here sooner than later. Only draw back is the US dollar has tanked since I put the orders in, could have saved a lot if I only had procrastinated - such is life.
-
8th November 2007 07:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th November 2007, 07:59 PM #2
TA, I'm replying with a tear in my eye, that was sad news and I feel for your both. I'm at the other end of the cycle, my girls have all grown up and left me ... and that creates yet another opportunity to buy quality hand tools ... the opportunity (threat?) of grandchilldren.
Your turn will come, your joy will follow, and the excuses to buy quality tools will grow with your family.
I have a "collectable edge plane" and a small plow plane hidden away and waiting to put under my Christmas tree but I'd be even happier to hear good news from you and yours.
Fletty
-
8th November 2007, 08:57 PM #3
While I've been mulling over a post here, Fletty put together the words my feeble brain was struggling for.
I can only agree and offer my heartfelt best to your wife and yourself TA.
Your choice of tools from Lee Valley is certainly a harbinger of beautiful woodwork to follow.
Regards from Tele Point
SG.... some old things are lovely
Warm still with the life of forgotten men who made them ........................D.H. Lawrence
https://thevillagewoodworker.blogspot.com/
-
8th November 2007, 08:58 PM #4
Hi TA,, yep and hope there's xmas part3 soon
Mike
"Working to a rigidly defined method of doubt and uncertainty"
-
9th November 2007, 09:46 AM #5
So sorry to hear of your sad news. I wish you both the very best in that area.
And as for the Tools!!! Whew!! they are beauties!!
That Pull Shave is very interesting. I think I should have a closer look at that one.
Have you had or used a pull shave scraper before? What do you use it for?
Thanks
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
9th November 2007, 10:06 AM #6
Matt, consider that tree I gave you another Chrissy present. I hope those pretty tools aren't scared of some work on hardwood. Damien.
I'm a dancing fool! The beat goes on and I'm so wrong!!!!
-
9th November 2007, 07:35 PM #7
Thank you all for your heart felt replies.
When I my wife first told me I was gob smacked to say the least. I thought she was gonna really give it to me as she had been cranky and impatient for a few days before. Then she hands me a present. It was a stainless steel tea mug. I thought that's nice, not noticing Dad was written on it LOL. And asked what's the occasion. Then say turned the mug over... After I had a few minutes to let it soak in my first thoughts were I guess it's time I grew up. Second was I better get all those toys I've been thinking about before it's too late LOL.
What really was surprising about the whole thing is how many people told us they had multiple miscarries.
Damo
Thanx again for the timber. I'm still contemplating what to make from it. It's one of those pieces where I don't want to waste it so I have to have a pre-planned idea in place. I think they're up to the Aussies woods as I ordered the A2 blades for all of them. PM me your mailing address please.
Wendy
I like to pull a tool more than push. I hadn't used a pull shave such as this one before but have used spoon shaves and found the ones that pull to be better than the ones you push. I have a Stanley 82 scraper (see pic) and find it excelled when the old blade is replaced with a piece of HSS planner blade. So when I saw the scraper shave I new it was going to be one of those tools that don't get used often but your' glad you have it when you use it. If you find one for sale grab it. I would part with mine for any reason. Next GTG I'll bring it along. This pull shave is for "dishing things out such as a chair seat. If they had one with a flat bottom I would have grabbed that one too. The scraper shave is another one of those tools that looks very handy in select places. The one I have looks more suited for flat surfaces so I might get a second and found the sole for concave surfaces. Most of the work I do has few flat surfaces so I have a lot of different shaping tools such as these for the various curves I encounter. After all have you ever seen a straight line in nature... I don't think furniture should either, or at least minimal straight lines... Almost forgot... Thx for the leather bbound note pad I won at your GTG. I use it all the time. It's sitting next to me right now on my desk .
-
9th November 2007, 09:56 PM #8
Hi Matt
So the pull shave can be for any surface you like, flat or other and this would depend on the blade in it?
I've not seen such an item around in person, though I'm sure I've seen them in catalogues somewhere.
I've being working with more and more curly and cranky grain recently, so something like that, as well as planing and scraping, definitely makes getting a good finish much easier.
Glad to hear the covered notebook has been a winner
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
10th November 2007, 09:20 AM #9
Hi TS, As others have said, sorry aslo for your sad news.
That is one nice Stanley 82 scraper. Have never seen one, but I do like the look of it.
All the best
Pops
-
10th November 2007, 01:51 PM #10
Not to worry mate. First time miscarraiges are extremely common, or so we were told by the doctors. Yep, had the same thing happen to us.
We now have three of them and plenty of woodworking tools. I have the little bullnose as well. It is a great tool.
-
10th November 2007, 01:57 PM #11
I've attached a few pics of the soles of each and a pic of the cigar shave I have. The pull shave would be difficult to do really precise work on a flat of convex surface as you can see it's convex itself. Though if Lee Valley were able to ship one without a ground sole it looks like it could be worked. But the final production one I have doesn't have enough meat left on the sole to flatten it out. Also the mouth opening's a bit too open but it wouldn't be too difficult to add a shim to close it up. The whole geometry and ergonomics of it mean I'll be able to remove a lot of material quickly with little effort as well as doing fine work.
The scraper shave though looks like with a bit of grinding would be a good compliment for the cigar shave and a few others I have when difficult grain is encountered on a concave surface. So I'll probably buy another and modify it. Some people can never have enough planes, I can never have enough spoke shaves. Very versatile on complex surfaces and leave a much better finish than rifflers.
-
10th November 2007, 04:13 PM #12hutch
- Join Date
- Sep 2007
- Location
- turners beach tasmania
- Age
- 63
- Posts
- 53
hi ta sorry to hear about your lose same thing happened to us now i have three daughters and one of them is a third year apprentice carpenter joiner
-
10th November 2007, 05:48 PM #13
Sorry to hear your sad new.
Reality is no background music.
Cheers John
-
10th November 2007, 11:20 PM #14
-
10th November 2007, 11:47 PM #15
Good on ya Matt & all the best for the future....
I have a funny story (funny now) along those lines that I only told for the first time last weekend & I was VERY VERY red wined at the time... I doubt that it would be very funny posted here now, so, all the best, now get busy & make something(s)Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
Similar Threads
-
How to Sharpen a Plane Blade Part 3: How to sharpen the front side freehanded.
By soatoz in forum JAPANESE HAND TOOLSReplies: 6Last Post: 16th May 2009, 08:46 AM -
Bloody Caps - Part 2
By ubeaut in forum ANNOUNCEMENTSReplies: 15Last Post: 18th July 2005, 10:20 AM -
I see the light
By Bob Willson in forum WOODIES JOKESReplies: 16Last Post: 26th July 2004, 06:02 PM -
Re-polishing a cabinet. Part 3
By Shane Watson in forum FINISHINGReplies: 2Last Post: 30th January 2002, 05:01 PM