Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Ryobi AP13AK thicknesser
-
25th January 2008, 10:49 PM #1New Member
- Join Date
- Jan 2008
- Location
- Tasmania
- Posts
- 1
Ryobi AP13AK thicknesser
Just got a new AP13AK (second one in 2 days) and the blades miss the wood by 3mm,checked the blade adjustment and it is as per the instruction book, they sit 3mm above the rollers. Can se no instructions on how to adjust the rollers, not that I should have too on a new machine.It also has a bolt that is not put in all the way due to the angle it is at.(worse than cross threaded) The first one also had bolt trouble. It had a loose one in the bottom of the box that was stripped from the factory.Took it back and the guy at the store said as a joke "it must have been made on Friday"
Are all these made on Friday ?, I think I just want my money back.
-
25th January 2008 10:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th January 2008, 06:23 PM #2
Probably packed on the same pallet all the way from facory to local wholesaler to retailer, so probably made same day by the same people. I think I would be very definite about wanting my money back.
Perversely, your probably lucky to get duds out of the box that you can return before the get wood dust into the works, at least it can't be blamed on user error like it would be if it became obvious after a couple of months use.
Similar Threads
-
Ryobi Thicknesser
By GregLee in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 18Last Post: 26th July 2004, 08:39 PM -
Ryobi Thicknesser
By `Felix` in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 15Last Post: 20th January 2004, 11:10 AM -
Ryobi Thicknesser
By Bud in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 22Last Post: 24th October 2003, 11:08 AM