Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: thicknesser stand
-
30th May 2011, 10:24 PM #1member
- Join Date
- May 2007
- Location
- Mapleton, QLD
- Posts
- 18
thicknesser stand
Have just purchased a Hafco T330 Thicknesser which is supplied with a stand, Once assembled the stand is a bit flimsy for my liking (pressed steel), I intend to use some Ply bracing to make it more rigid. I also want to put it on castors for movement around the shed. My concern is that the machine sitting on the stand is very top heavy and I fear if not handled delicately it could topple. Has anyone had previous experience with this machine or similar with ideas on satbilising the set up? Would appreciate any advice.
Barry
-
30th May 2011 10:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th May 2011, 10:35 PM #2
I've got my "thinnesser" mounted on slides under a bench........so that when its needed I pull it out...flip it up to its working position........and use it that way.
I spent 4 years or so with it on a stand that took up valuable floor space all the time....if it was being used or not.
Similar Threads
-
I need inspiration - Mobile thicknesser stand
By John H in forum WOODWORK - GENERALReplies: 22Last Post: 7th January 2009, 09:19 PM -
stand for jointer and thicknesser
By jimhanna in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 19th November 2007, 09:38 PM -
Thicknesser Stand
By Woody1 in forum WOODWORK PICSReplies: 9Last Post: 28th October 2005, 09:45 PM -
Thicknesser Stand
By Barry_White in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 23Last Post: 17th September 2004, 12:53 AM