Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: welding inverters
-
28th January 2012, 07:58 AM #1New Member
- Join Date
- Jan 2012
- Location
- cyprus
- Posts
- 1
welding inverters
I am an amateur electronic technician ,,,and i have a fronius welding machine transpocket 1500 ......2004 model and i want to have if anybody can help me to have the electronic diagram of it to check the electronic parts of it .
I want to fix it with a low budget cost or to change the main board ..can anyone help if you people have anything of the above ,,it will be apreciatated
-
28th January 2012 07:58 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th January 2012, 10:09 AM #2Engineers are qualified to make claims
- Join Date
- Dec 2010
- Location
- Victoria
- Posts
- 81
I beleive these have surface mount components on the control boards is this correct? If so you would need a reflow station but worse is diagnosing such small components. I know boards are very expensive.
John
-
28th January 2012, 09:35 PM #3China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,479
SMD's can be replaced by hand, if you are skilled at soldering, I would contact Fronius direct I have taken this approach with other companies and it can sometimes be suprising how much they are willing to help
Similar Threads
-
High end MMAW inverters?
By LongValley in forum WELDINGReplies: 8Last Post: 7th January 2012, 01:24 PM -
Lanthanated tungstens for ac/dc tig inverters
By steran50 in forum WELDINGReplies: 1Last Post: 11th October 2011, 09:12 PM -
phase inverters (re-visited, sorry)
By greencan in forum THE HERCUS AREAReplies: 7Last Post: 5th November 2010, 10:44 PM -
Power Inverters
By Silly Sandra in forum GENERAL & SMALL MACHINERYReplies: 6Last Post: 31st January 2009, 11:34 AM -
Mig Inverters are they new?
By Pulpo in forum WELDINGReplies: 1Last Post: 2nd January 2008, 01:59 PM