Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
6th May 2013, 08:36 AM #1
Start of Jeffwood thicknesser restoration
I have started the strip down. I will be soda blasting first than painting. any rusted parts will be getting the molasses treatment.
Replace bearings,get motor serviced then put it back together.
This has a square head. Does anyone know if I can buy a round head for this or do I need to machine a shaft to suit a spiral head?
Regards
Ross
019.jpg025.jpg022.jpg021.jpg
-
6th May 2013 08:36 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th May 2013, 09:01 PM #2
Jeffwood Thicknesser after Soda blasting
I Soda blasted thicknesser today. The bed and drive rollers will go into molasses to get rid of the rust. Everything needs to be washed down then primed and painted. I need to replace a couple of bushes and make a new gear for one of the drive rollers. Then put it back together. Here it is after Soda Blasting
.004.jpg009.jpg006.jpg008.jpg005.jpg
-
12th May 2013, 01:16 PM #3
Hi Ross, many years ago I had a friend make me up a 3 bladed round cutter-head for my Jeffwood thicknesser, works well but I would shudder to think what it would cost me now to make up.
I would be looking to the US for a spiral insert head, they are a nice thing.
Now that you have taken the cutter-head out of the machine, do a drawing of all the crucial measurements, journal and bearing size, cutter-head diameter etc ...
Send this detailed drawing of to the companies in the US that specialize in custom making these heads such as ::: Byrd Tool Corp ::: etc.. and ask for a quote.
I would not bother to go through any one in Australia, they will only put a mark up on the item, the Australian dollar is still good and I think you will be pleasantly surprised with the pricing in the US compared to how much the same item will cost over here.
Melbourne Matty.
-
13th May 2013, 11:06 PM #4
-
14th May 2013, 12:40 AM #5SENIOR MEMBER
- Join Date
- Nov 2011
- Location
- Newcastle NSW
- Posts
- 775
Hi Ross,
Looking good so far, and based on your trade I think I will be adding this to my watch list, sounds exciting.
Cheers,
Camoz
-
18th May 2013, 04:19 PM #6
Now who's ruining our economy?
Does it have blades? Lightning won't strike you if you do use a square head ... but I wouldn't stick my hand in there.
My Cooksley has a 50cm square head. With a spiral head it would be unbelievable ... one day ... one day ...
Paul
-
18th May 2013, 08:38 PM #7
-
18th May 2013, 08:41 PM #8
-
15th April 2016, 11:55 AM #9
Similar Threads
-
Jeffwood 702 Thicknesser Information
By Fargo in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 19Last Post: 12th February 2024, 06:17 AM -
Jeffwood cutter block bolts
By mac4bus in forum WOODWORK - GENERALReplies: 0Last Post: 18th April 2011, 11:37 AM -
Ryobi AP13AK Thicknesser won't start
By Nick009 in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 13Last Post: 27th July 2009, 01:30 PM -
Old Jointer/thicknesser restoration
By Tool-Horder in forum WOODWORK - GENERALReplies: 19Last Post: 16th November 2006, 11:56 PM