Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: clock parts
-
11th May 2010, 11:37 AM #1Member
- Join Date
- Nov 2007
- Location
- eaton
- Posts
- 87
clock parts
I am looking for a good supplier of clock parts and need to find a supplier that has numbers that actually stick to wood or has spigots that can be glued into holes to stop them falling of
In the past the supplier I used in Bunbury may have had old stock and I had great difficulty in sticking them down
I have been thinking that instead of numbers I may be able to use brass or stainless rivets of different sizes (larger for the quarter hour and smaller for the five minute indicators) glued into the wood - comments please and where could these be sourced from. They could be sprayed over to keep their shine.
Regards
Mike
I originally placed this in the woodturning section as I hoped there would be a greater audience than just clock makers re the use of rivets instead of numbers - was a good idea while it lastedLast edited by groverwa; 11th May 2010 at 07:00 PM. Reason: reason for placing in the woodturning section
-
11th May 2010 11:37 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th May 2010, 12:15 PM #2
Why not try LETS MAKE TIME CLOCK CO - Woodwork Forums, they're are sponsor here on the Forum for the CLOCKS - Woodwork Forums
Link to their site is at the top of the pageCheers
DJ
ADMIN
Similar Threads
-
Clock mouldings for old clock
By T5AUS in forum RESTORATIONReplies: 1Last Post: 8th September 2009, 11:23 PM -
1st clock
By TTIT in forum CLOCKSReplies: 13Last Post: 26th October 2008, 12:10 AM -
My First Clock
By Superbunny in forum CLOCKSReplies: 3Last Post: 7th June 2008, 07:55 PM -
Clock Parts
By ravlord13 in forum CLOCKSReplies: 2Last Post: 26th December 2007, 07:49 AM