Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: HELP... Spindle stopped working.
-
3rd February 2015, 11:37 AM #1New Member
- Join Date
- Feb 2015
- Location
- Gold Coast
- Posts
- 1
HELP... Spindle stopped working.
Hi first time on this forum and i'm desperate.
So the problem is as follows i was try to get control of my CNC's plunge rates and spindle speed so i enabled g code S read and F read.
However all this did was stop my spindle from spooling at all. so in a bit of a panic i reset my dsp to default....
Now i cannot get the spindle to start even manually the VFD seems to be controlled by the dsp and i cannot find any setting in the dsp to adjust the spindle.
My CNC a CX-1325 running a rznc-501 dsp, a xinfutai 5.5kw VFD also cnc came with no CDs or Manuals.
Im just lost i cant find any manuals or default software/setttings.
Can Anybody help me.
-
3rd February 2015 11:37 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Motor stopped working on dust collector
By stevepay in forum GENERAL & SMALL MACHINERYReplies: 12Last Post: 13th October 2014, 02:00 PM -
Elu 172 TGS has mysteriously stopped.
By rubberwood in forum TABLE SAWS & COMBINATIONSReplies: 9Last Post: 21st November 2013, 07:54 AM -
RSS feed for woodworkforums stopped working yesterday
By joez in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 1Last Post: 19th November 2013, 06:58 PM -
If only, I had stopped for lunch
By argeng in forum METALWORK FORUMReplies: 13Last Post: 16th April 2013, 12:05 AM -
My Thien dust cyclone stopped working
By Dengue in forum DUST EXTRACTIONReplies: 3Last Post: 20th January 2013, 01:35 PM