Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 11 of 11
  1. #1
    Join Date
    Nov 2005
    Location
    Central west nsw
    Age
    73
    Posts
    8

    Default pine wash stand completion needs

    My dad left me an incomplete washstand - colonial pine he told me.

    It needs a top and backpiece to put the old tiles I have on it. Also, the towel rails at the side are missing. The rest is cleaned and shellacked.

    I want to know is it better to get a piece of marble or put a timber one on, of colonial pine same as the rest. I dont want a hole in it (for a basin). I thought marble might be too heavy.

    I have a pattern for the back piece( found it amongst his stuff). I can see where the towel rails went but they have goo in them. I can't restore it but don't want it mucked up either. I may be able to access a woodie in my area but just need some advice on what NOT to do.
    Thanks

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2007
    Location
    St Georges Basin
    Posts
    1,017

    Default

    What was on the top originally? Can you see screw or nail holes in the top of the side rails that would have held a wood top in place? I think its always best to stick to the original if you can. Pics would be very useful too!

  4. #3
    Join Date
    Nov 2005
    Location
    Central west nsw
    Age
    73
    Posts
    8

    Default

    There are nail holes about every 6" or so around the front and sides, just a few across the back a bit further apart. Interestingly, there are screw holes from the top down, in the middle of the bottom of the drawer frames. Thats a puzzle.

    Not sure how to upload personal pics
    Last edited by countrylady; 30th November 2009 at 07:24 AM. Reason: add pic

  5. #4
    Join Date
    Mar 2009
    Location
    Hobart
    Posts
    497

    Default

    When you say Colonial pine, I am wondering if you may mean Baltic, Huon, Kauri, Hoop, or even Oregan. There is no such timber actually called Colonial Pine to the best of my knowledge.

    Depending on how large your washstand is, this might actually influence your decision re a marble top. Basically marble is very expensive (ie approx cost I would think $500 +, depending on the actual size of the washstand) and could cost more than the commercial value of your piece. Having said that I will be getting a slab of marble for a Huon Pine washstand table I have, since this is what it would have originally come with and to find a large old piece of Huon to fit my table would be difficult. Marble does look nice and is extremely durable, but I would only use it if the structure of your washstand is sufficiently solid.

    I guess if it is possible to find an old piece of which ever pine your washstand is made from might be the easier way to complete your piece. Regarding the side ? towel rails and a back for your tiles shouldnt be too much of a problem. It might be easiest, however, to discuss your needs with say a cabinet maker or antique furniture restorer to see if they can help you. All the best in restoring your piece.

  6. #5
    Join Date
    Aug 2007
    Location
    St Georges Basin
    Posts
    1,017

    Default

    A picture really would help. Marble might not be that expensive, there used to be some good junk shops in the central west where you could pick up a piece of marble at a reasonable price, have you tried any of them?

  7. #6
    Join Date
    Mar 2009
    Location
    Hobart
    Posts
    497

    Default

    Hey burra, pity we don't have such resources down here in Tassie, with slabs of marble laying around. To find pieces here is akin to finding chicken lips. New marble though is expensive, I have enquired.

    If it were possible (as I have seen the occasional piece on ebay), the transport costs would be the killer from a cost perspective.

    For you guys on the mainland it definitely is much easier.

  8. #7
    Join Date
    Nov 2005
    Location
    Central west nsw
    Age
    73
    Posts
    8

    Default

    Thank you for your replies
    Re marble-there is a granite and stone supplier in Orange that does kitchen benchtops etc. She may have an odd piece suitable. I think it may be too heavy though, so think I will opt for wood. I think you are right Burra, that it was there originally.

    Re the type of wood, it is definitely pine not oregon and maybe baltic though not as white. Hasn't got the yellow of Huon. Anyway, its old and like the other pieces Dad restored for me-chests of drawers and dressers. I have some pieces of old pine from his bits, but none that size.

    Thank you to both of you, I appreciate your suggestions.

  9. #8
    Join Date
    Nov 2005
    Location
    Central west nsw
    Age
    73
    Posts
    8

    Default

    Found how to upload the pic. Just the skeleton of the piece to work with

  10. #9
    Join Date
    Mar 2009
    Location
    Hobart
    Posts
    497

    Default

    Hey Countrylady that looks like a nice piece and definitely worth restoring. You are definitely lucky to have access to granite and/or stone, and you might be right that it could be too heavy. IHowever, guess you could always perhaps take the washstand into the supplier and show them. I mean afterall at most I would have thought you would only be after a slab say 1-2cm thick. It mightn't be as heavy as you think. Just a thought.

    Re the timber, (a) well done on first figuring out how to post a photo as I havn't and (b) looking at the grain, to me it looks like it could be kauri pine. Kauri was certainly used for a lot of furniture around the turn of the century. I have a kauri pine duchess (chest of drawers with trinket drawers and a mirror), which has some design features similar to your washstand.

    Goodluck with it, it should come up nicely.

  11. #10
    Join Date
    Aug 2007
    Location
    St Georges Basin
    Posts
    1,017

    Default

    Yep, I've got a couple just like it, one in cedar and one kauri. I put a piece of marble on the kauri one and pink terrazo on the cedar. There seem to be a lot of those around in similar condition, just waiting for a bit of tlc. That will handle stone fine if you can find some. Drawers, backs and towel rails are straightforward too!

  12. #11
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Thumbs up

    That looks very much like Kauri to me. Lucky lady!!

    A granite top on that will look great.

Similar Threads

  1. Pine and MDF stand
    By Rodt68 in forum FINISHING
    Replies: 7
    Last Post: 5th May 2008, 05:43 PM
  2. Car Wash
    By Rodgera in forum WOODIES JOKES
    Replies: 0
    Last Post: 16th February 2008, 03:41 PM
  3. Jarrah Dining table nearing completion
    By Wild Dingo in forum WOODWORK PICS
    Replies: 12
    Last Post: 6th July 2006, 08:25 PM
  4. Something for the geeks to wash with
    By Grunt in forum WOODIES JOKES
    Replies: 6
    Last Post: 5th August 2005, 01:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •