Thread: What wood is this?

To me that looks like an old Hoop Pine teacher's desk.
I have one myself, mostly because I'm an old teacher.
Spent time teaching at Bourke Ward in Broken Hill.

G'day Artme,
You'll be pleased to know that Burt Ward school is still a beautiful looking old school (though I doubt the kids think so), in fact it even has "snob appeal" with parents outside the precinct trying to get their kids in there using dodgy addresses!!
So tell me , what is your desk top made of?
Thanks,
Bruce.

Opps, that should be Bourke Ward school - everyone knows that Burt Ward was Robin in the Batman tv series.

mountain ash

Mountain ash a.k.a. Tassie oak? really?
Do you think that the original top was Tasmanian Oak?

dunno about tassie oak yes aka tasmanian mountain ash.
prolly local ash would be fine, try to get some old timber with a few old dings in it, will look better than new ash.

Hi Bruce, my top was, and is Hoop Pine. I stripped all the old varnish off the whole table and then rubbed Danish oil into it. Left all the blue and red ink stains deep scratches and sewing tracing wheel marks exactlt where they were - helps to remember the history.

I suggest you get some wide boards of Hoop for the top to keep character
with the the original.

Thanks Artme and Astrid.
One last question/s - how much larger is the table top than the frame and how was the edge finished.
Thanks guys,
Bruce.

overhang varies, usually more at the end side
should be in proportion to the base.
think sides usually a simple ogee? small curve with small lip.
trot off to a low end antique shop and have a look, this style is pretty common.

Bruce, overhang on mine is 40mm on the sides and 35mm front and back.Corners of top are rounded and edges finished with simple ogee.

Back when these were made most tops, like mine came from a single board.

Righto, I'm organised.
Many thanks.
Bruce.