Thread: Scott's Hot Rod

Yes fozzy they are remote control wheels ,Billy iam not sure of colour yet maybe red withh brass see what happens

Just finished drawing the ford logo and the disc in cad program,will take to work tomorrow and waterjet.Will post pics tomorrow.

Got logo and disc cut but think ill redo disc and make them bigger.Not sure wether to mount logo on rear of tailgate or on top what do you think???

Looking good Scotty

Great progress Scotty!!!

Thanks Harry72 and Artme,
I redrew the disc and made the bigger in size,stayed back today and got waterjetted and got one mounted tonite along with welding the front chassic onto the body and mounting the diff onto the body.

It's looking really good so far, Scotty

Mount the logo on the rear of the tailgate as in one of your photos below

that will be the way to go

Attachment 144237

Thanks Woodjunky,
Thats were i will most pobally put it but i may still try too shrink it abit smaller.Got 3 of the disc positioned last nite and started to make the brake callipers to mount to the disc.I will be looking at running brake line to the disc also and mounting a brake cylinder to the firewall if possible.Once their finished ill get onto the front stabiliser brakets and bars.

I was wondering if it was possible to make it smaller but as it is now it still looks good if it doesn't work out that you cant make it smaller.

Tried to look for an original photo to see its actual size and going by the photo below it will be so hard to duplicate that !!!

Attachment 144396

will be looking forward to your next series of photo updates so we can have a look at the detailing you are currently doing

F######## broke another screw in the diff,not making another one though, will remove it, to much work done to it to redo.Thanks Woodjunky i will try to shrink a little but theres no way getting it the size of the original one.Tonight i got the callipers done and mounted and the rear stabilisers done and mounted

Today i made the front stabiliser brakets ground to shape and mounted to front bar and also mounted last disc and brake callipers,then i bent up the stabiliser bars and filled in the front chassic and mounted the stabilisers.I then made and fixed the brake cylinders to the firewall and began to bend up the brake lines

Wow, flying along with this one Scotty and looking awesome.

Thanks munruben,
Today i finished off the front brake line up to the callipers, made up a new radiator cap,made engine mounts and started on the exhaust system

That's pretty rapid progress Scotty!!!

The detail in your work is excellent.!