Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Transfering photos to timber
-
24th July 2017, 09:27 AM #1Novice
- Join Date
- Jul 2017
- Location
- Mudgee
- Age
- 46
- Posts
- 11
Transfering photos to timber
Hi guys
hope you can help, I've seen a lot of articles on how to to transfer photos to wood
(print it out in mirror reverse, glue it to the timber then rub off the paper with wet fingers....)
but they all say to use "a clear gel medium" to glue the pic down
most of those articles are American tho
does anyone know of of a suitable product available for this...?
I tried wood glue and it leaves a white haze
cheers
-
24th July 2017 09:27 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
24th July 2017, 11:50 AM #2New Member
- Join Date
- Dec 2016
- Location
- Brisbane
- Posts
- 7
My daughter recently used gel medium to transfer a photo to fabric. You can buy it at Office Works, Spotlight or Bunnings, e.g. https://www.spotlightstores.com/craf...iums/c/mediums.
Jeremy
-
24th July 2017, 12:25 PM #3Member
- Join Date
- Aug 2012
- Location
- NZ
- Posts
- 96
There is a CNC burner that's not a laser thus appears to have fantastic gradient control. But it's obviously only greyscale rather than colour. There was a Russian (I think, don't shoot me if he was Ukranian or someOtherStanian) fellow on ebay selling them. The software imported images and the burner spat out renderings of said images.
-
24th July 2017, 02:50 PM #4
I've used the mirror image face down, but the original must be a photocopy or laser print. The image is an acrylic emulsion, set by heat in the photocopier or laser printer. Attach it to the wood with a couple staples outside the image area, and pass over it with a clothes iron at its highest setting (usually "Linen"). This transfers the emulsion to the wood, although it's time consuming. A soldering iron also works well. Periodically lift the paper to assess progress.
For ink-jet printers, which also provide color, fabric shops sell print paper for transfer to clothing, also using the clothes iron.
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
24th July 2017, 07:05 PM #5Novice
- Join Date
- Jul 2017
- Location
- Mudgee
- Age
- 46
- Posts
- 11
Thanks everyone for your help
we're in a small town so don't have many shops but there is a small Bunnings so I'll check there
i'll also try the trick with the iron on high heat too...
i'll post some pics in project sharing thread when I'm done
Thx again )
-
25th July 2017, 12:59 AM #6
Dan,
the "clear gel medium" they are talking about is an artists medium. Its basically a paint without the colour pigment. Artists use these mediums to add to coloured paints to get various effects, matt, gloss, satin, thickening or thinning or controlling drying time. I hope Mudgee is big enough for an art or craft shop. Go to them and tell them what you want it for and they will probably know the technique anyway. An artist friend of mine explained it to me a couple of years ago. IMG_1357.JPG_edited-3.jpg
I have included a picture of a couple of items. The jar on the left is the medium which will work as described. The middle bottle is a Jo Sonya varnish (they make heaps of different types, I think I have seen Jo Sonya stuff at Bunnings?) which will probably work and the Mod Podge will also probably work.
Another way to do your ink jet printer one is to print out the picture (reversed) onto a waxed paper (you might need to tape it to a carrier paper) or use a label sheet (take off all the labels and print on where the labels were, the shiny side). The ink wont dry (careful it can smudge) but simply place it face down and rub it and most of the ink will be transferred to the wood.
Regards
SWK
PS I did a quick look and found Derivans web page, they even have the "Gel medium" (MM4) but any of the 2, 4, 5, 6, 7, 9, 11, 26, 28 & 30 mediums will work (and probably 24 but that would have something like glitter in it).
-
25th July 2017, 12:23 PM #7GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,695
Frank Howarth has recently done the photo to wood thing with a CNC. I think the way he did it is the single most complicated thing I have ever seen done in wood but it is very interesting and you would wonder how he thought it all through but he is an architect so that may help. There is no way on God's earth I could even contemplate it. The audio is lousy at the beginning but keep watching....
CHRIS
-
25th July 2017, 12:36 PM #8New Member
- Join Date
- Dec 2016
- Location
- Brisbane
- Posts
- 7
-
25th July 2017, 01:53 PM #9
Mod Podge is an excellent method of both sticking down paper onto timbers (and MDF) and also finishing off over the top.
-
26th July 2017, 08:59 AM #10GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
SWK said it all for the artists' acrylic medium. Most makers of acrylic art paints have a couple (matte, satin and gloss).
The idea is that the medium does a better job of diluting acrylic paints than water will ever do = never goes chalky and adhesion is excellent.
As a top coat for finishing, clear as picture glass. Mod Podge is likely one of many medium formulas.
-
7th August 2017, 01:38 PM #11Novice
- Join Date
- Jan 2012
- Location
- usa
- Posts
- 12
I learned of this years ago when I was in the food service industry. I can only give you general information. You will have to follow up to learn more. But it came from the bakery department in one of our supermarkets that decorates cakes for birthdays and other special occasions. They are able to take a photo you give them and transfer it to the icing on the cake. They copy your photo on a computer and print it out on a special paper, lay it over the cake top, and then mist it with water. They then pull off the paper, leaving a very respectable image of your photo on the cake top. The ink is both water soluble and edible.
I assume you could transfer an image in similar fashion and then seal the image with spray shellac, acrylic, or some other finish that is not water based.
You will have to get with someone at a bakery for more specifics about the ink, papers, and process they use. But it might be a help.
-
7th August 2017, 05:59 PM #12Senior Member
- Join Date
- Apr 2012
- Location
- Thornton NSW
- Posts
- 456
you can, there are products made specifically for this. KW Doggett papers sell one called wood fx which is a veneer on a gloss white card backing. I don't see why you couldn't use paper backed veneers in an inkjet, though the porosity might cause some ink bleed (photo papers are manufactured to control this using clays and polymer coatings) and you'd want to be careful about the grain direction - even paper has long and short grain sides and feeding the wrong way will curl.
Similar Threads
-
Auction. Timber Lot photos
By Greg Ward in forum TIMBERReplies: 0Last Post: 3rd September 2015, 01:10 PM -
Transfering Email Addresses
By 46150 in forum COMPUTERSReplies: 4Last Post: 31st December 2009, 05:28 PM -
Tip for transfering dovetails marks
By derekcohen in forum HAND TOOLS - UNPOWEREDReplies: 2Last Post: 2nd November 2009, 09:20 AM -
Transfering Videos To DVD - Which One Is The Way To Go?
By Metal Head in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 8Last Post: 23rd May 2007, 09:14 AM -
transfering lpg gas
By durwood in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 6Last Post: 20th July 2006, 07:18 PM