Needs Pictures: 0
Results 1 to 9 of 9
-
19th July 2016, 10:24 AM #1
Were to get best price to purchase 1/2" upcut flute spiral router bit
Not happy with results from routing 60 dado trenches to cut.
I have another 150 to go.
Carb-i-tool sells their 1/2" upcut flute spiral for $91
Carbatec is $119 with two ball bearing guides
Anyone know where to get one for about $40 - $50?
Some where close to Melbourne where I can pickup today?Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
19th July 2016 10:24 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th July 2016, 10:28 AM #2
Grrrr.
And the 5th time thru:
https://www.carbatec.com.au/routing-...bit-12-7mm-diaThanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
31st July 2016, 09:11 AM #3Senior Member
- Join Date
- Mar 2008
- Location
- Australia
- Posts
- 141
Whiteside from Holbren USA. I have 5mm solid carbide upcut spiral from them. Won't get it today though - about 2 weeks shipping by post. On current exchange rate. US40 is about the same as CarbiTool after shipping (mine was about US12 for a few things). So may as well get the CarbiTool.
Whiteside Solid Carbide Spiral Upcut Double Flute Router Bits
Whiteside have a great reputation and huge range.
-
31st July 2016, 09:41 AM #4
I purchased that one from Carbitec.
Haven't used it for dados as yet but every time I use it its cuts cleaner.
I have to post that when Carbitec have actual stock their prices are acceptable in comparison.
Used to be I could get things cheaper from the US including postage.
Not anymore.
Having to wait 2 weeks from the US.
Compared to 6+ weeks and still not knowing for sure from Carbitec.
I order from the US.
Even if I have to pay an extra $15 to $25 AU for the more expensive items.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
31st July 2016, 07:07 PM #5
http://stores.ebay.com.au/Aldavs-Sto...p2047675.l2563
Seller in AusThanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
1st August 2016, 05:29 PM #6GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,028
-
1st August 2016, 07:27 PM #7
-
1st August 2016, 11:07 PM #8
Probably not available at the mo.
If you need to communicate with him, send him a private message here.
He's just responded to my queries in a very professional manner.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
2nd August 2016, 08:42 PM #9GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,028
Similar Threads
-
1/2" Solid Carbide Spiral Upcut Bit
By aldav in forum PRODUCT REVIEWSReplies: 22Last Post: 28th November 2016, 05:53 PM -
Hand taper pin reamers, spiral flute v straight flute
By bob ward in forum METALWORK FORUMReplies: 11Last Post: 22nd July 2014, 09:30 PM -
Review - Freud Spiral Upcut Router Bits
By Dean in forum WOODWORK - GENERALReplies: 4Last Post: 21st May 2008, 10:32 PM -
Need opinions on Chisel Mortisers against spiral upcut router bits
By rbarnold in forum HAND TOOLS - POWEREDReplies: 5Last Post: 16th April 2007, 10:03 AM -
Spiral upcut router bits
By numbat in forum ROUTING FORUMReplies: 8Last Post: 15th February 2005, 05:38 PM