Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Paul Call 12" Bandsaw
-
15th April 2020, 03:25 PM #1
Paul Call 12" Bandsaw
I acquired this some time ago. I refurbished the saw with the exception of the front cover. Painted, new bearings, new tyres. I don't have the room to set it up so it has to go.
It comes with a 240V motor. It works but that's the best thing about it. It's fine for this little saw but you might want a slightly better/newer motor.
I only have the one blade for it. It's not new but it should still cut.
The urethane tyres are new but they haven't been glued onto the wheels. They are a good fit but they're not super tight. Will need a bit of contact glue to keep them in place under load.
$250 Pick up only from Katoomba NSW.
BS1.jpgBS2.jpgBS3.jpgBS4.jpgThose were the droids I was looking for.
https://autoblastgates.com.au
-
15th April 2020 03:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd April 2020, 12:28 PM #2
Similar Threads
-
(not mine) Paul Call bandsaw on Gumtree (NSW)
By poundy in forum FOR SALE on eBay and external sites.Replies: 2Last Post: 28th March 2018, 04:29 PM -
6" Paul Call Jointer & Table saw - missing blade springs
By JaydenL in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 7Last Post: 19th April 2016, 08:23 AM -
tyres for an old 12" Paul Call bandsaw
By Pete57 in forum BANDSAWSReplies: 3Last Post: 4th May 2015, 08:55 PM -
Help needed -Paul Call Bandsaw
By Woody60 in forum BANDSAWSReplies: 7Last Post: 30th April 2009, 01:09 AM