Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 21 of 21
Thread: review of hammer N4400
-
15th October 2006, 11:32 PM #16
-
15th October 2006 11:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
16th October 2006, 09:50 AM #17
Yeah, plenty of reviews on the Laguna, a lot not entirely favourable.
The other Italian Mini Max seems OK.
For me, having met Brendan and spoken with past customers, Felders after sales service and general attitude to the punters is a big plus.
Question is "is it enough to push us over the pricing barrier?"
Like the colour scheme too, wonder if its available in Chartruese?Bodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
16th October 2006, 10:26 AM #18If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
16th October 2006, 10:39 AM #19
-
16th October 2006, 06:26 PM #20
-
16th October 2006, 07:43 PM #21SENIOR MEMBER
- Join Date
- Jan 2004
- Posts
- 686
HI Steve,
It's very basic - just pay attention to the bolts that come out of the quadrant lock - from memory, one was longer than the other.
You'll need an electrician to wire up the plug (it's a european fitting,) a 15A extension lead and a blade - 3980mm. Oh - and a bag of rags and some diesel to clean off the vaseline from the table. If it's the weekend, email me through the forum if you get stuck. But, it's bleeding obvious how things go together.
The detents on my machine were blo0dy accurate - I set the table to 45 degrees, and ripped a chamfer off some stock by going half way, backing out and then repeating the exercise starting from the other end. The two saw cuts aligned perfectly.
It's a testament to the quality control of the Italian manufacturer.
Cheers,
eddie
Similar Threads
-
Do you own a Hammer N4400 bandsaw
By FlyingDuck in forum BANDSAWSReplies: 54Last Post: 4th January 2018, 02:47 AM -
review or Hammer 310 Planer thicknesser
By Zed in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 3Last Post: 15th October 2006, 10:55 PM -
Hammer N4400 Bandsaw
By eddie the eagle in forum BANDSAWSReplies: 0Last Post: 4th July 2006, 08:59 AM -
Hammer N4400 review
By AlexS in forum BANDSAWSReplies: 5Last Post: 13th June 2006, 10:50 PM