Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 16
-
19th November 2016, 06:41 PM #1New Member
- Join Date
- Sep 2011
- Location
- USA
- Posts
- 5
anyone using a Laguna Resaw King blade on a 14" saw?
With Black Friday around the corner, Woodcraft has 20% off on this blade. I'm hoping to get some feedback from someone using this blade on a 14" saw. I don't ever see myself buying a larger saw and realize my Delta's 1 hp motor might be under powered but hoping the carbide blade will make up for it. It's expensive but hey, a early Christmas present.
-
19th November 2016 06:41 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th November 2016, 07:03 PM #2GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
I have used one for a year or so now, no problems provided you keep the gunk off it. Have not been able to find someone to sharpen it, which makes it a pretty expensive blade. Have used it mostly for resawing veneers
regards,
Dengy
-
20th November 2016, 11:39 PM #3
Hi Dengy, have you not heard of Blade Runner at Garbutt.
Link here.
Sure hope he's still operating.
Cheers, Ian"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
21st November 2016, 12:56 AM #4SENIOR MEMBER
- Join Date
- Sep 2014
- Location
- Australia
- Posts
- 663
If you want to save more, find your local saw sharpener and but your blades from them. They will make them to size, they can make them with the same materials, and they are truck loads cheaper.
I just Bought a 1/4" and 3/8" carbon steel blade (4000mm) from my local mob, $20 each. I cant remember what I paid for the last resaw blade, but it was cheaper than anything of the shelf by nearly half.
-
21st November 2016, 02:44 PM #5GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Thanks for the comments Ian and Pearo.
Ian, I use Mark at the Blade Runner a fair bit, but he can't sharpen carbide teeth on a bandsaw blade.
Pearo, the Lagyuna Resaw King is a carbide tooth blade, hence the added expense. But it is good, once you set the bandsaw up properly. I normally use Henry Bros for purchasing my other bandsaw blades and tablesaw bladesregards,
Dengy
-
21st November 2016, 05:11 PM #6
Hi Wood Miser,
I use a Resaw King on my Laguna 14twelve. I have found it to resaw and cut veneers very effectively even on our very tough hardwoods. I wouldn't say that you end up with a dressed face but it takes very little finishing to get a flat usable surface from a sawn face. The 'secret' seems to be the sharpness provided by the TC teeth AND the variable tooth spacing which appears to stop harmonic vibration of the blade that results in a corrugated surface on the cut face.
I made a decision on Day 1 to only use the Resaw King blade on cuts deeper than 100mm (4") as I am suspicious that cutting thinner pieces with only a few teeth in the kerf reduces the 'set' on the teeth?
All in all, I am very happy with it.
flettya rock is an obsolete tool ......... until you don’t have a hammer!
-
21st November 2016, 06:28 PM #7
I use my Resaw King for Special Occasions.
It is ferociously expensive but very worth it IMO. My saw is a 14" Laguna SUV and it drives it well.
The finish is exceptional. The blade has no offset at all. It cuts very smoothly, even the most terrible timbers and burls.
My day to day big blade is an American made Lennox Woodmaster CT which was(is?) 1/5th the price and gives a cut that is pretty damned fine. This blade is also a carbide toothed blade.
The RSK did snap recently. Henry Bros in Sydney repaired it and sharpened it for $15. A bargain! They did a great job.
-
21st November 2016, 10:28 PM #8
I didn't know this Dengy. I don't have any CTC blades yet......but I did purchase one last week which I expect any day now. I had plans to go to Mark for sharpening when needed in the future sometime, very disappointed to hear that wont be an option.
Looks like we will both be mailing them off to Henry Bros when sharpening needed. It's gonna suck to have to either be without it for a while or heaven forbid buy a second one to swap out when sharpening is required. Maybe we can do a deal to use each others bandsaw while the others is away for sharpening.
Cheers, Ian"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
24th November 2016, 10:48 AM #9SENIOR MEMBER
- Join Date
- Jun 2003
- Location
- Brisbane, Qld
- Posts
- 947
Another one here who has been using a resaw king on a laguna 14/12. Absolute beast of a blade. I'm not 100% convinced they're value for money compared to the non-TCT version or something along the lines of a lennox though, as the price difference is huge. I suspect the resaw king might only be worthwhile if you frequently cut veneers...
-
24th November 2016, 03:06 PM #10GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
I am using the resaw king on a Laguna 14SUV. I have has it for some time now. It is being used for mainly resawing as I have another bandsaw. Whilst it cuts beautifully, when moving through timber like rosewood or Tassie blackwood you have to move slowly. Setup of the saw is critical otherwise over 13" the cut can bow. When I purchase the blade Gregorys could not provide me with the name of anyone who could sharpen them. Later I found out from them that they had someone on the Sunshine Coast who could do them, but there had been a learning curve. In the US they can send back to the manufacturer
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
10th February 2017, 05:25 PM #11GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
I am yet to find anyone who can sharpen this blade. Was great while it was sharp, but Australian hardwoods are tough on this blade. Looks like I will be sourcing my resaw blades from Henry Bros from now on.Was an expensive experience
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
10th February 2017, 05:45 PM #12GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Bob, CSK in Deception Bay just north of Brisbane did a nice job on my Resaw King. They also make a carbide tipped blade, 3/4" for $180, from memory, with a tiny kerf
regards,
Dengy
-
10th February 2017, 06:15 PM #13
Henry Bros has done my RSK twice now, plus fixed a snappage. Very happy with the job they did.
-
10th February 2017, 07:48 PM #14SENIOR MEMBER
- Join Date
- Aug 2013
- Location
- Montmorency Victoria
- Posts
- 554
-
10th February 2017, 07:55 PM #15GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
Interesting woodPixel, Henry Bros only today told me they can't sharpen the RSK. Ordered another blade from them keep me going. Dengy might give CSK a call. Will be going to Maleny at the end of April so could drop it in.
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
Similar Threads
-
Resaw King off a Laguna - where to sharpen?
By Evanism in forum BANDSAWSReplies: 13Last Post: 21st May 2014, 03:22 PM -
1.3 TPI resaw blade problems
By Redgy in forum BANDSAWSReplies: 8Last Post: 26th March 2014, 02:14 PM -
Resaw blade for bandsaw newbie
By Astrodog in forum BANDSAWSReplies: 11Last Post: 10th July 2012, 08:28 AM