Cool, they've posted a lot of saw handle drawings too.
Printable View
Here's an instruction sheet I prepared for installing folded saw backs.
Attachment 349276Attachment 349265Attachment 349266Attachment 349267Attachment 349268Attachment 349269Attachment 349270Attachment 349278Attachment 349271Attachment 349272Attachment 349273Attachment 349274Attachment 349275Attachment 349277
I'm loading a box for shipment to Australia over the next two weeks. If anybody wants any folded saw backs send me a PM.
Rob,
''can you supply these without the ATW stamp, and what is the forum pricing?
No stamp. I need to check current pricing of brass as it's dropped about 30% since I last bought stock and I need new. I have heavy (0.125") and medium (0.085") brass in any length up to 22". 304SS and mild steel for bluing 0.095" are additional options. I may have to make the longer lengths but should be doable in a couple weeks.
A new batch of backs, some going to Australia. On the left are medium weight brass, in the middle are heavy brass and on the right are some steel.
Attachment 389974
Ground, rough profiled and trued. Upper left are steel, upper right are heavy brass and lower rank is medium brass.
Attachment 391850