Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
12th January 2010, 12:03 PM #1New Member
- Join Date
- Jan 2010
- Location
- Bungendore, Australia
- Posts
- 5
Foam Rollers for 2 Pack Polyurethane
Hi.
I'm going to paint my boat with International Perfection. Their instruction video says it's best to use solvent resistant high density foam rollers and then tip with a brush.
Does anyone know where to get this type of roller?
I have been using the white ones from Bunnings (uni-pro) for the Interprotect primer but they start to get a bit soft after a while. Are there better ones?
Thanks!
Ian
-
12th January 2010 12:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th January 2010, 09:32 AM #2
You haven't had any replies so far.
I would suggest giving Duck Flat Wooden Boats a call in Adelaide. Speak to David. They use rollers for painting both enamels and two pots and can put you onto a brand quickly.
Michael
-
13th January 2010, 02:49 PM #3New Member
- Join Date
- Jan 2010
- Location
- Bungendore, Australia
- Posts
- 5
Thanks Michael - I'll give that a try.
Ian
-
13th January 2010, 06:45 PM #4
I'm hesitant about a recommendation, being here in the colonies, but a dead give away when looking is the solvent resistant rollers will usually have a plastic core, rather then the paper typically seen.
-
14th January 2010, 04:52 PM #5New Member
- Join Date
- Jan 2010
- Location
- Bungendore, Australia
- Posts
- 5
Thanks - I've spoken to the International people and they can supply rollers so I'll probably use those for the top coat.
Ian
-
14th January 2010, 07:19 PM #6
Your local paint supply store will have solvent resistant rollers on the shelf.
Similar Threads
-
Epoxy rollers
By Arron in forum BOAT BUILDING / REPAIRINGReplies: 8Last Post: 13th June 2009, 07:55 PM -
Knurling rollers?
By neksmerj in forum METALWORK FORUMReplies: 5Last Post: 24th July 2007, 10:41 PM -
2 pack Polyurethane, any advice?
By hoidey in forum FINISHINGReplies: 1Last Post: 25th June 2007, 02:54 PM -
Two pack polyurethane; rubbing back to a smooth finish
By Bowyer in forum FINISHINGReplies: 3Last Post: 28th September 2005, 09:06 PM -
Rollers
By jow104 in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 5Last Post: 7th October 2004, 05:55 PM