Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Goat Island Skiff
-
15th March 2014, 11:53 AM #1New Member
- Join Date
- Mar 2014
- Location
- Carlsbad California
- Posts
- 4
Goat Island Skiff
Just recieved the plans for GIS. Question- the hull dimensions, are they measured from the top edge of the ply or the distance between sheer and chine 491mm---672mm along the bottom, not quite sure where to start this measurement, ??? For instance the front says 672mm. is this from the top edge of the ply or from the shear which is 49mm from the edge of the ply??
thanks
James
-
15th March 2014 11:53 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th March 2014, 05:11 AM #2New Member
- Join Date
- Mar 2014
- Location
- Carlsbad California
- Posts
- 4
MY LAST POST
It seems from the plans that it is measured from the edge, just want to be sure.
-
31st March 2014, 01:57 AM #3New Member
- Join Date
- Apr 2013
- Location
- Cognac - FRANCE
- Posts
- 1
GIS Panels
Hello all
I built a GIS (named TAKKA) last summer in France (near Cognac).
The "Panel Offset Drawing" gives all necessary informations....where to start.....spacing...grid..etc
Reading this sheet ....bottom left handside down = "Start from this corner"...idem for the sides (upper right)
The corners are indeed the starting points.
Please do NOT skipp the (nice) warning for bottom pannel "Cut 20mm outside bottom panel"....nice to have some "extra" when "closing" the whole boat with bottom panel
Just follow instructions and measurments..it DOES work..great boat
Happy building.
JIBI
Similar Threads
-
Goat Island Skiff vs Green Island 15
By ausie in forum BOAT DESIGNS / PLANSReplies: 26Last Post: 15th July 2021, 05:19 PM -
Goat Island Skiff
By bitingmidge in forum Michael Storer Wooden Boat PlansReplies: 513Last Post: 31st October 2019, 04:03 PM -
Goat Island Skiff
By woodeneye in forum CLASSIC BOAT RESCUE & ADOPTIONReplies: 2Last Post: 31st December 2011, 11:17 PM