Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
25th January 2024, 09:47 AM #1GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,334
Distinguishing treated timber from nontreated
Aside from the look of it, is there a fail safe way of distinguishing treated pine from non-treated?
Reason is I’ve just picked up a small load of 90x35 which is pre-loved but in very good shape. I would like to use it outdoors but it’s already a bit weathered and I can’t tell whether it’s treated by looking at it.
Cheers
ArronApologies for unnoticed autocomplete errors.
-
25th January 2024 09:47 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th January 2024, 01:17 PM #2GOLD MEMBER
- Join Date
- Oct 2018
- Location
- Dandenong Ranges
- Posts
- 1,944
Hi Arron. Usually, the timber will have grading marks stamped on it (MGP10). If it is treated it will also have H3 printed alongside. Or it may have plastic labels stapled to the end grain indicating the same. The old CCA had a real greenish tinge to it. The new LOSP can be a lot harder to tell (they have stopped dyeing it green) but cutting it will release the naphthalene smell. Hope some of this might help.
Sent from my SM-G986B using Tapatalk
Similar Threads
-
About treated timber
By phaser in forum TIMBERReplies: 11Last Post: 10th December 2023, 01:14 PM -
Treated timber
By Woodturner101 in forum WOODTURNING - GENERALReplies: 4Last Post: 10th June 2014, 09:30 AM -
Treated timber warning
By Tonyz in forum WOODWORK - GENERALReplies: 6Last Post: 4th April 2014, 02:55 PM -
Recycled timber - Treated or not?
By dreddyboy in forum WOODWORK - GENERALReplies: 4Last Post: 1st August 2013, 11:22 PM -
Treated timber
By Jerryj in forum TIMBERReplies: 5Last Post: 4th January 2010, 02:21 AM