Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 20
Thread: Timber rack
-
15th October 2005, 12:22 AM #1
Timber rack
In response to another thread, I very quickly scratched out an idea for a timber rack. Last night, I decided to turn my idea into a design.
My shed is so bad that I make sure that you can’t see it when I take photos of projects, & a timber rack will help fix this problem.
I have shown the end & side elevations only, & the measurements are 1m x 4m x 2m high. The rack will be on wheels so it can be pushed into a corner & dragged out to get to the other side. This means it will only take up a bit over 4 square meters of floor space. There is also plenty of room for sheets on the inside.
The rack will be made from 50 x 50 x 5mm angle but it is for timber, so I am not sure if it belongs here.
Hope you like it.
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
15th October 2005 12:22 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
15th October 2005, 12:35 AM #2
My suggestion's, you'll need more support arms as a 2m spacing will lead to sag in your stacked wood, Id have support every 600mm max.
And you may want some sections of the rack to have flat soild shelfs for smaller bits of wood.....................................................................
-
15th October 2005, 12:56 AM #3
Thanks for that Harry, I was thinking of puting in another 2 Aframes & using some 16mm MDF on a couple of the shelves for the short bits, but the good thing is, it's easy to change at this stage. I can see what you mean & I think your right, so back to the auto cad as they sort of say.
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
15th October 2005, 01:16 AM #4
I have had a quick look on autocad & decided to take Harry's advice. I will have 6 A Frames & reduce the rack to 3 meters long. This will give me one on each end & 600mm Centres.
Thanks again Harry.The fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
15th October 2005, 01:20 AM #5
No worries Ticker, glad to be of help.
....................................................................
-
15th October 2005, 11:39 AM #6
If you make it a bit over 1200 wide the top shelf could hold ply and mdf etc.
-
16th October 2005, 03:26 AM #7
Echnidna,
I don,t have a lot of sheet material on hand as I live within about 20 mins of being able find a supplier of just about anything I need, but my problem is I like to recycle old timber & I have a growing pile of it. That said, I do have some offcut mdf, ply etc., But I was thinking that the center of the apex, nearly 2 meters high, would be good for that. Also, the bigger I make it, the more it will cost & cost is a factor because I need a band saw but my family insist on having 3 meal every single day. They just don't understand my needs.
Thanks anyway for your idea, I am interested in hearing all ideas', hence the thread.
steveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
16th October 2005, 09:38 PM #8
More option.
Dont Exit from the CAD Program and turn off the computer just yet.
Here is some more ideals.
First one, make a few cross section to for more wood. I even put some wood in there to show you..
Secound, here is a way to stor half sheet goods.. if you have access to sheet goods them you gonna need a place to place there cut offs.
And put wheels on it too, so you can roll it away from the wall and place stock in the middle..
he hehehe more thinking going on in your head.JunkBoy999
Terry
-
16th October 2005, 11:15 PM #9
G'day Terry, how you going mate. Nice idea, drawing in the timber. I like what you have sugested, & I like your mod to my dwg. What did you use to do that?
I plan to use the inside for sheet material, but I think I will just build the frame first & then decide on the internal layout.
I have costed the angle @ $7.30 / metre & I am looking at about 58.5 meters, so I want to get it right.
steveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
16th October 2005, 11:48 PM #10
Gidday ticky
Check out this one by Alexg............I reckon shes a cracker!!!
http://www.woodworkforums.ubeaut.com...ad.php?t=18075
REgards louJust Do The Best You Can With What You HAve At The Time
-
17th October 2005, 12:45 AM #11
Lou, Thanks for your input, all ideas' & comments are welcome.
I read the thread you sent me, very interesting. I am a boilermaker trying to be a wood worker Lou, & I am not all that fast at my woodwork. On top of that, I don't get a lot of time to enjoy my wood work, so I think I may stick to steel for this one as it is a matter of something I need to do as opposed to something I want to do.
Thanks any way mate, it was still very interesting reading & food for thought.
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
18th October 2005, 01:48 AM #12
Lou,
I have revisited your sugestion of using Alexs' design, or at least a variation of it. I still like the idea of the 2m x 1m Apex that I started with, & for me at least, building with steel would be quicker & easier, but at $7.30 /metre, it was going to cost over $400.
I have decided to use my apex design but with 70 x 35 timber & some M&T joints. Even using twice the material, the cost will be about 75% less at around $120.
I have had to redo all my drawings, not finished yet, but I am not really ready to start this project as yet anyway.
I am so glad I decided to float this idea as I now have a much clearer idea of how I will build my new rack & what it will be built out of.
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
18th October 2005, 07:21 AM #13
Gidday Ticky
I think you've just learn't what our forum's all about ................Well Done!!
Alex is a top bloke...........I'm sure he wouldn't mind if you PM him for some advise & feedback on 'Setup' & how his design is holding up!!!!
Keep us posted.......For me Alex's design I'll be one of my first projects for my new "Shed"
REGards LouJust Do The Best You Can With What You HAve At The Time
-
18th October 2005, 08:14 AM #14
Ticky,
It seems to me that building your rack out of angle iron is a far more expensive and time-consuming option than making it out of wood. See http://www.woodworkforums.ubeaut.com...?t=6605&page=1 (posts #9 & 10) for a rack which has served me very well and which was cheap and easy to build.
Rocker
-
18th October 2005, 08:53 AM #15
hey Ticky.
The Pic above was just done with MS paint, I did not feel like turning on the laptop and using Aldus Photostyler 2a. If you where here in Kansas I think you would go crazy at my favorite store. It is called the Yard. It is a big scrap yard for metal. More aluminium them and other because of the 6 major Aircraft companies. but most sold at scrap prices.JunkBoy999
Terry
Similar Threads
-
Mobile Timber Rack
By alexg in forum WOODWORK PICSReplies: 14Last Post: 12th December 2010, 09:36 PM -
Timber on roof rack
By Tiger in forum WOODWORK - GENERALReplies: 34Last Post: 27th July 2005, 11:22 PM -
Timber Rack
By Fred in Tassie in forum WOODWORK - GENERALReplies: 5Last Post: 16th January 2005, 08:48 AM -
Timber rack - strength.
By Robert WA in forum WOODWORK - GENERALReplies: 3Last Post: 27th September 2003, 09:16 AM -
Wine rack timber
By Sir Stinkalot in forum TIMBERReplies: 8Last Post: 23rd November 2001, 01:48 PM