Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
-
6th September 2007, 05:47 AM #1Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Drill press - holding wheels and small parts
Good day
When I had to drill wheels (knobs) and small parts, I used hold-down clamps and other combinations that where "big" on the small wheels...but, no more...
The idea came from other shop-aid that I made for cutting small pieces on the table saw...so, why not on the Drill-Press.
So now, the DP table is clean from all the clamps and hold-downs and here it is...
Best Regards
niki
Last edited by DJ’s Timber; 9th March 2010 at 05:35 PM. Reason: Save images for posterity
"Niki departed this life after a number of very successful years as a member of these forums, he will be sadly missed by all" - Woodworking Australia's Woodwork Forums - February 2010
-
6th September 2007 05:47 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th September 2007, 05:48 AM #2Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Last edited by DJ’s Timber; 9th March 2010 at 05:36 PM. Reason: Save images for posterity
"Niki departed this life after a number of very successful years as a member of these forums, he will be sadly missed by all" - Woodworking Australia's Woodwork Forums - February 2010
-
6th September 2007, 05:49 AM #3Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Last edited by DJ’s Timber; 9th March 2010 at 05:37 PM. Reason: Save images for posterity
"Niki departed this life after a number of very successful years as a member of these forums, he will be sadly missed by all" - Woodworking Australia's Woodwork Forums - February 2010
-
6th September 2007, 07:01 AM #4
Another elegant and simple solution to a common problem, niki.
Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
6th September 2007, 07:16 AM #5SENIOR MEMBER
- Join Date
- Aug 2003
- Location
- Wodonga
- Age
- 59
- Posts
- 707
Niki,
I have been watching all your posts with the different jigs that you have made and I have 2 questions.
Do you make anything else other than jigs?
Where do you find the time, you must use all available time thinking up and making jigs.
And well done, some of them are so simple in design, yet so functional that you have to think...Why didn't I think of that.
-
6th September 2007, 07:30 AM #6
I think thats very clever. Might have a use for that idea down the track. Thanks for showing.
-
6th September 2007, 07:52 AM #7
very good, thanks for sharing that.
Bob K__________________________________________
A closed mouth gathers no feet. Anon 2009
-
6th September 2007, 08:08 AM #8Awaiting Email Confirmation
- Join Date
- Jan 2007
- Location
- Goulburn NSW
- Age
- 89
- Posts
- 913
Niki, you have done it again I have been using a machine vyce to hold round things and flattening edges never again.
les
-
6th September 2007, 12:34 PM #9GOLD MEMBER
- Join Date
- Jan 2007
- Location
- Adelaide
- Posts
- 2,794
Thanks for sharing, Niki, nice solution to a common problem. Having to make specific holding clamps on the spot for small items is a recurring problem for home handymen who have only "one of a kind" problems to solve. (It has been for me, anyway. )
I prefer to use ridged rubber as a gripping device instead of sandpaper, though, because I had some early experiences of scuffing when there is a bit of unwanted movement. Being under-skilled I prefer to be over-prudent...
Cheers
-
6th September 2007, 02:56 PM #101/16"
- Join Date
- Mar 2007
- Location
- Adelaide South Australia
- Posts
- 544
Another great idea. A definite keeper
Don't force it, use a bigger hammer.
Timber is what you use. Wood is what you burn.
-
6th September 2007, 05:24 PM #11Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Thank you so much for the kind words
Geoff
I was making furniture in Japan and when we moved to Israel, I made again (we left most of them in Japan) and...when we moved to Poland...I made again.
We bought a new house in Poland but it was in "rare" condition, meaning, walls ready for painting, concrete floors, no internal doors,kitchen, toilets or bath...so you can imagine how much work I had to do ( I made everything myself) and in the mean time I made also a few units for the living room.
This summer, I made mainly garden furniture and planters so I had kind of "vacation" from "fine woodworking" and I found the time to improve things around the garage...
Time?...that's what is called "retirement"...you have all the time in the world to do whatever and whenever you want...as I can see, you still have some 20+ years to go
Frank&Earnest
Actually, you don't have to use nothing. If you glue the sanding paper to the edge that touches the fence (or any other anti-skidding material), that's enough. It's just me, I like it "to be on the safe side"
Thanks again
niki
-
6th September 2007, 05:41 PM #12GOLD MEMBER
- Join Date
- Oct 2002
- Location
- NSW
- Posts
- 1,610
I'm excited (as in "Doh! Why didn't I think of that?") by something no-one else seems to have picked up on - the tie between the knob on the lid, and the winding handle for the quill.
Having just been through the exercise of breaking the quill return spring (it only lasted 20 years!!) and having to hold the quill up, I wonder why this simple and obvious approach eluded me...
Cheers,
Andrew
-
6th September 2007, 06:07 PM #13Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Andrew
To be true...I got it only when I was taking the pics and I needed free hands...
Some solutions are coming suddenly from nowhere and I found myself many times shouting "idiot, why you didn't think of it before"...looks like the simple things are difficult for us in this "computer era"...
Regards
niki
-
6th September 2007, 06:13 PM #14
Frankly, I'm rather surprised you didn't think of it.
That's the first modification I ever made to my press. But then again, I'm forever trying to accurately centre the drill on small pieces of wood, so it didn't take me long to decide I needed a 3rd hand.
The wire-twist garden ties are the bee's knees for the job, too.
- Andy Mc