Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Wearing Dovetail marking guide
-
11th August 2008, 03:18 PM #1
Wearing Dovetail marking guide
I decided to use a free day on the weekend (SWMBO doing work for the school and the kids at the outlaws) to make a dovetail guide of the kind explained by [ame="http://www.amazon.co.uk/Making-Woodwork-Devices-Robert-Wearing/dp/1861081294/ref=sr_1_8?ie=UTF8&s=books&qid=1218427868&sr=1-8"]Bob Wearing[/ame] in his book of jigs and aids.
Attachment 80262
I didn't have any brass for the plate, so I made it out of aluminium - the marks on the surface show how soft it was before I started working it.
Attachment 80264
I made it 1:7 and will probably make a couple of others for other ratios that I use (1:6 and 1:8). The brass is a fence that enables the guide to be used to mark several pins or tails (as you prefer) at once.
Attachment 80263
The use instructions are in the book (or if you are interested, I can send a copy of the relevant pages). Alll in all, it's nice to get one project done, for once!Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
11th August 2008 03:18 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
16th August 2008, 04:34 PM #2New Member
- Join Date
- Aug 2008
- Location
- Ipswich Queensland Australia
- Posts
- 1
Could you please send me the pages required for the jig. Thanks Peter.
[email protected]
-
16th August 2008, 09:13 PM #3
email sent
Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
23rd August 2008, 09:24 PM #4
hmm... very interesting
Similar Threads
-
Wearing of the Green
By Penpal in forum WOODTURNING - PEN TURNINGReplies: 9Last Post: 24th May 2007, 12:12 PM -
Dovetail Jig Guide Bushings
By Jedo_03 in forum ROUTING FORUMReplies: 3Last Post: 10th April 2006, 11:17 PM -
Veritas dovetail guide
By outback in forum HAND TOOLS - UNPOWEREDReplies: 50Last Post: 16th May 2004, 10:46 PM