Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 106 to 109 of 109
Thread: What have you invented?
-
20th May 2012, 03:46 PM #106
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,817
I finally got around to applying a lick-o-paint to this thing and sorting out the power cords.
I also added a support for a small water cooling bath (the icecream container)
Power strip suspended by a light chain from the ceiling.
I still haven't decided where on the floor it is going to reside so in the meantime it will just be sitting on a wooden base.
-
20th May 2012 03:46 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th May 2012, 04:27 PM #107Dave J Guest
Looks great Bob, that came up well.
With the power cord, what about welding a piece of square or round pipe up from the centre to just above the grinders with some flat bar across at the top to attach the power point? Then it would be solidly mounted and in easy reach to turn either one on or off. Also then there would only be a single cord hanging down which would allow it to swivel around pretty well.
Dave
-
20th May 2012, 06:49 PM #108
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,817
Good idea!
Originally Posted by Dave J
Looks great Bob, that came up well.
With the power cord, what about welding a piece of square or round pipe up from the centre to just above the grinders with some flat bar across at the top to attach the power point? Then it would be solidly mounted and in easy reach to turn either one on or off. Also then there would only be a single cord hanging down which would allow it to swivel around pretty well.
Dave
-
21st May 2012, 12:46 AM #109Dave J Guest
I think it would finish off that great looking grinder stand.
Nice work again.
Dave
