Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Macson hacksaw coolant pump
-
28th March 2011, 08:52 PM #1
Novice
- Join Date
- Apr 2007
- Location
- Frankston
- Posts
- 14
Macson hacksaw coolant pump
Has anyone out there got a Macson hacksaw fitted with a coolant pump?
The pump is a 5 cm spring loaded cylinder which operates off the cam lobe in the bottom of the tank.
If so has anyone pulled one of these suckers apart recently?
The reason I ask is I had a Macson burnt in a fire a decade ago. The pump was full of rust and charcoal when I pulled it apart. Recently acquired another Macson (from this forum) not fitted with a pump and wish to rebuild my old unit.
-
28th March 2011 08:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th March 2011, 12:04 AM #2
Old Boy
- Join Date
- Feb 2007
- Location
- Katherine ,Northern Territory
- Age
- 69
- Posts
- 1,977
I haven't seen anything Macson for about 30years .
They made a decent lathe ,I used one for quite a few years at the place where I did my time ( no not prison
).
Maybe they are like the old Hercus hacksaws with a cam operated piston pump ,with a plunger and a spring return.
Kev."Outside of a dog a book is man's best friend ,inside a dog it's too dark to read"
Groucho Marx
Similar Threads
-
Power hacksaw coolant system
By neksmerj in forum METALWORK FORUMReplies: 4Last Post: 10th June 2009, 12:13 AM -
Macson literature
By burraboy in forum METALWORK FORUMReplies: 41Last Post: 30th November 2008, 08:55 PM -
Macson Metal Lathe
By DJ’s Timber in forum METALWORK FORUMReplies: 3Last Post: 5th December 2007, 06:30 AM
