Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Metal and Wood Turning Job
-
12th April 2013, 01:12 PM #1
Metal and Wood Turning Job
I have a small job that requires the skills of both a metal and wood turner.
Details are here
https://www.woodworkforums.com/f8/woo...ng-job-169132/Those were the droids I was looking for.
https://autoblastgates.com.au
-
12th April 2013 01:12 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th April 2013, 01:45 PM #2GOLD MEMBER
- Join Date
- Aug 2007
- Location
- Saskatoon, SK, Canada.
- Posts
- 1,440
The easiest thing to do is to get some Cane Joins/Couplers and adjusting them to fit your staffs. If you can't locate them at one of the Aussie suppliers they can be ordered from here in Canada. These are brass and would show the brass when put together and these will not show when the staff is put together. With both types you will need to be careful to centre the holes when you drill your pieces.
Happy trekking
Pete
-
12th April 2013, 02:33 PM #3
Thanks Pete, didn't realise LV had those. Just what I'm after I think. The 1" one is pretty close to spot on the diameter of the shaft.
Those were the droids I was looking for.
https://autoblastgates.com.au
-
9th May 2013, 07:39 AM #4
Wheelinround has got this one sorted for you now has he ?
Hiking in NZ. We for for a hike, don't they go for a 'tramp'. Had a kiwi mate back in the mid 90ies who was telling us a story how he went out for a 'good tramp' and he wondered why we were all laughing.
-
9th May 2013, 03:35 PM #5
Similar Threads
-
Wood and Metal Turning Job
By NCArcher in forum WOODTURNING - GENERALReplies: 30Last Post: 19th December 2014, 07:02 AM -
Question about metal lathe pen turning
By Jack.Tar in forum WOODTURNING - PEN TURNINGReplies: 10Last Post: 6th April 2012, 03:28 PM -
Metal Inlay Into Wood - Resin/Epoxy with metal powder?
By r5e in forum WOODWORK - GENERALReplies: 14Last Post: 15th March 2010, 11:17 AM -
Metal Turning Projects Book
By YarrD in forum METALWORK FORUMReplies: 6Last Post: 3rd May 2009, 09:33 AM -
Small metal lathes for pen turning
By Big Shed in forum WOODTURNING - PEN TURNINGReplies: 21Last Post: 4th March 2008, 10:02 PM