Picture(s) thanks: 0
Results 16 to 30 of 89
-
1st September 2010, 07:12 PM #16Senior Member
- Join Date
- May 2010
- Location
- tasmania
- Posts
- 104
Qctp
I am also looking at QCTP for my newly bought al960.
I find the shimming to centre height a bit of a pain and the qctp come with specfic holders eg for parting tools etc in any case.
I had decided to get an AXA as it is similar in bulk to the existing turret, the BXA is a bit bigger and i thought that it it might get in the way. Other holders are cheaper (a bit) too.
I have lost a couple of ebay auctions from a local bloke with the sets going for more than $200.
I found (thanks to another posting here) CDCO tools in the USA. The QCTP with 5 holders was $78 and additional holders are $8. The shipping is $43 and i was able to squeeze in a few other bits at v cheap prices. (inc a dial height guage, magnetic DTI base, 2 parting blades and a boring bar set) for a total of $218 us which is $251 aussie
Also Gavin has shown us a phot of his tangental tool holder- I have one too (an "eccentric diamond" holder) which is the best thing in the whole world. It only comes left handed- they have a vague plan to make other shapes.
I have also peered into my oil filler cap (ref Lather's woes) and have seen the dreaded swarf too- presumably from the threadcutting of the filler hole. I only have a couple of hours work on the machine so far and will look forward to flushing it all out on the W/E.
BTW they sent me the direct mount type 4 jaw with the lathe
-
1st September 2010 07:12 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st September 2010, 08:10 PM #17
So we have one 960 being fitted with an AXA style and one with a BXA style. This is going to be very instructive for those of us who haven't made up our minds yet. Russell & Stuart will be the pathfinders (aka guinea pigs) for the rest of us. Can either advise the largest shank size tools able to be held once they've fitted theirs, I have a number of carbide holders I'd want to keep using in any QCTP I fitted.
-
1st September 2010, 11:00 PM #18Dave J Guest
Hi,
Just a bit of info for you, if you notice in their add they have "For Aloris" these are Chinese copies of the famous American Aloris brand. If it was a true Aloris it would be worth around 6 times the amount you paid for it as seen in the link below.
Aloris Super Precision Tool Post Sets - emachinetool.com
Most people just refer to these ones as the Chinese wedge style BXA's.
Dave
-
1st September 2010, 11:04 PM #19Dave J Guest
Hi Gavin,
These links might help you to work out which one suits your tools and lathe.
http://www.aloris.com/catalog/aloris_p3.pdf
http://www.aloris.com/catalog/aloris_p4-5.pdf
Aloris Catalog -- Tool Posts | Quick Change Tooling
Dave
-
2nd September 2010, 05:29 AM #20GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
2nd September 2010, 01:22 PM #21Dave J Guest
No problem Eskimo,
I thought that might help, working out the heights. It's hard buying a new tool post not knowing if your buying the right one.
From what I have read the copies work good. The real Aloris are supposed to have a more quality feel about them and are better made (but at a price to rich for most hobbyist)
If you really want gold plated ,the Dorian tool post it has a triple wedge lock.
Dave
-
2nd September 2010, 04:03 PM #22GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
2nd September 2010, 04:17 PM #23
Dorian is also the maker of the timing transponder we use in motor racing in Australia. The unit is half the size of a packet of smokes and is around the $450 mark. Perhaps "dorian" is the word for bl00dy expensive in some foreign language
-
2nd September 2010, 05:41 PM #24Dave J Guest
Eskimo, you could be the first Aussie to have one and give as all a review of it, lol
Going by the prices below it looks like they are they are around the same as Aloris tool posts for what looks like a better product.
Dorian Tool quick change lathe tool post sets.
Gromax Online
They have just brought out the new tool post, in the pictures below you can see the difference. The first one is the old design.
A full right up on them can be found here.
CandlePowerForums
Dave
-
3rd September 2010, 12:10 PM #25GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
3rd September 2010, 01:32 PM #26
-
4th September 2010, 11:04 AM #27GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
7th September 2010, 10:39 PM #28Dave J Guest
I came across this picture of the AXA and BXA side by side that I thought might interest you, they are sitting on a smaller 8x lathe compound.
I hope the AXA is not to small for your lathe, but going off the prices a bloke down your way is selling the AXA ones for on ebay for, you would make on it if it is too small and you sold it.
Dave
-
8th September 2010, 09:16 AM #29Senior Member
- Join Date
- May 2010
- Location
- tasmania
- Posts
- 104
Thanks for the photo. The bxa sure is bigger! It may also be a bit bulky and get in the way of the tailstock. We'll see how we go, and will sell it on if no joy. BTW the guy at CDCO said that he "guaranteed" that it would work well. Not worth the pixels that it was typed on 'tho.
-
9th September 2010, 12:53 AM #30Senior Member
- Join Date
- Mar 2009
- Location
- Melbourne
- Age
- 54
- Posts
- 380
My Hercus 260 has a 10" swing and I'm considering trying one of these types of tool post but as a 10" swing fits into both the AXA and BXA range I was wondering if anyone else had fitted either to a similar sized lathe?
My feeling is that the BXA may be a bit bulky and have too much overhang from the top slide as the current original 4 way tool post is about 2.5" square which is the same as the AXA size?
Any of you blokes got any thoughts on this? All opinions gratefully received.
Cheers,
Greg.
Similar Threads
-
Quick Change countersink bit
By John G in forum HAND TOOLS - UNPOWEREDReplies: 21Last Post: 31st October 2012, 09:22 PM -
Quick Change Gearbox gears
By Garry Edwards in forum THE HERCUS AREAReplies: 3Last Post: 6th March 2010, 03:47 PM -
Quick Change Toolpost
By nexusone in forum METALWORK FORUMReplies: 3Last Post: 2nd January 2008, 07:52 AM -
Quick change toolpost -make your own
By forge in forum METALWORK FORUMReplies: 3Last Post: 18th September 2006, 07:12 PM -
DIY Quick Change Toolposts
By Rebus in forum METALWORK FORUMReplies: 1Last Post: 3rd January 2005, 01:35 AM