Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: 50 Cal
-
23rd July 2012, 04:20 AM #1nine digits
- Join Date
- Jul 2010
- Location
- Geelong Vic
- Age
- 70
- Posts
- 616
50 Cal
G'day blokes,
I've managed to get back in the shed, I know without photo's it didn't happen. I'm waiting for the battery's to charge to get some pics.
But I'm hoping that someone can help me with one of the pens I turned, a 50Calibre from PSI. I cant get the twist mechanism to work when it's assembled. It works unassembled but it's still very, very stiff. Any help would really be appreciated. Thanks.Those who can do, those who can't don't.....................I think?
undies
-
23rd July 2012 04:20 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
23rd July 2012, 06:35 AM #2
just went and checked instructions , if the timber to thick at the back end ?
or maybe the mechanism is faulty
-
23rd July 2012, 09:04 AM #3
G'day Undies, nice to see you back. Yeah, what Troy said, + check out the inside of the brass tube for any CA that may have hardened in there. I had the same problem as yours, and found a thin layer of hard CA inside the tube which made too tight a fit for the transmission to turn freely.
I never forget anything I remember !!
-
23rd July 2012, 10:17 AM #4
Also sometimes the friction grip of the tube on the mechanism is just not tight enough to overcome the newness ,a quick squirt of wd 40 or similar into the mechanism, and blow out with air will loosen them up considerably cheers ~ John
G'day all !Enjoy your stay !!!