Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Can CA accelerator go off?
-
11th September 2012, 03:27 PM #1Member
- Join Date
- May 2009
- Location
- Roleystone Perth WA
- Posts
- 54
Can CA accelerator go off?
Hi,
Over the weekend I was finishing a pen with CA and accelerator. After application of the accelerant it was still tacky. I tried more / less of the accelerator but it didn’t seem to make any difference. If I left it for a longer than normal time (minutes) it would stop being sticky. I then could apply the next coat.
If I tried to apply the next coat before it dried it would grab little bits of the paper towel and the pen looked like it had dandruff.
It was a lovely day here in Perth, sunny around 30 and low humidity if that can make a difference.
Anyway long winded way of asking if I need to buy more / different accelerator or master the art of patience?
Thanks
Pete
-
11th September 2012 03:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th September 2012, 03:46 PM #2
Haven't heard of Accelerator going off but CA does go off, I actually threw out 2 bottles of the Hot Stuff Thin CA yesterday as it wasn't drying properly
Cheers
DJ
-
11th September 2012, 07:16 PM #3
Do a test of the CA using some sodium bicarbonate/baking soda from the kitchen - that should kick off inside a few seconds. If it doesn't...blame the CA!
Similar Threads
-
Accelerator pump pack replacement
By BoomerangInfo in forum WOODTURNING - PEN TURNINGReplies: 14Last Post: 13th December 2011, 10:52 PM -
Accelerator for CA
By plantagenon in forum WOODTURNING - PEN TURNINGReplies: 22Last Post: 13th December 2011, 09:08 AM -
Alternative accelerator for CA
By timberbits in forum WOODTURNING - PEN TURNINGReplies: 64Last Post: 3rd October 2011, 10:16 PM -
CA Accelerator?
By MitchB in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 31st May 2011, 01:40 PM -
CA glue and accelerator
By mingus in forum GLUEReplies: 9Last Post: 26th October 2007, 02:01 AM