Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Hot Water System
-
15th March 2007, 10:24 AM #1
Member
- Join Date
- Feb 2007
- Location
- WA
- Posts
- 56
Hot Water System
I need to reclad the outside of my reno job. Just using Hardiflex boards. The HWS has to be rmoved before I start but it is about 1.5 mtr high on the wall. Why do they put them up there? Real handy to knock your head on. If it is mains pressure wouldn't it be better of on the ground?
Regards
Greg
-
15th March 2007 10:24 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th March 2007, 11:20 PM #2
Deceased
- Join Date
- Oct 2003
- Location
- Kentucky NSW near Tamworth, Australia
- Age
- 85
- Posts
- 3,737
If its mains pressure it really wouldn't matter where it was but is a bit unusual.
Originally Posted by gregt
-
16th March 2007, 07:27 AM #3
SENIOR MEMBER
- Join Date
- Jan 2006
- Location
- Melbourne
- Posts
- 722
The instatanious ones often have a little diagnosis diplay on the front. That's the only reaon I could think it might be put at head height ... I have seen a number of them at that height and always wondered why, because it often means they are more visible too.
Mine is much lower ... and works.
