Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2004
    Location
    Victoria
    Posts
    93

    Default Laundry bench and Front loader questions

    Gudday. Laundry mini reno. Laundry bench wall to wall. Drop in sink. Front loader washing machine under bench.

    Questions

    Rather than cut a hole in the bench top and use original taps for washing machine what are options? Only need cold as washer heats own water.

    Can these taps/water lines be removed or are they able to be 'plugged' behind the wall and plastered over?

    What is best way for waste water from washer to get into the drain? (neatest)

    Thanks
    SN

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2006
    Location
    Melbourne
    Posts
    722

    Default

    Hi there, if you haven't got a problem cutting a section of plaster out to expose the pipes then you shouldn't have too much trouble moving them down under the bench. If you are lucky they will be flexible copper and may reach down without any changes required. The waste would normally go into the trough drain pipe ... depending where that is located ... you might be able to cut a hole in the side of the trough cabinet rather than bringing the pipe accross the top of the bench?

  4. #3
    Join Date
    Jun 2003
    Location
    ...
    Posts
    7,955

    Default

    Quote Originally Posted by OBBob
    The waste would normally go into the trough drain pipe ... depending where that is located ... you might be able to cut a hole in the side of the trough cabinet rather than bringing the pipe accross the top of the bench?
    The washing machine drain hose needs to go higher in a loop than the top of the washing machine before it goes into the drain outlet. This is for all machines but especially for a front loader.

    Failure to do so will stuff up your motor and could cause a flood into the machine through water backflow. DAMHIK.:mad:


    Peter.

  5. #4
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    14,269

    Default

    G'day SN

    At my parents house, when we renovated the laundry I moved the taps from the existing position above the washing machine to under the benchtop, then put two neat holes in the side of the cabinet for the hoses to run.
    With the drain hose I connected this straight to the S trap drain under the trough, But you must suspend the drain house up higher than the S trap so the water can't flow back into the washing machine

    View attach drawing

    Cheers DJ

  6. #5
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    8,175

    Default

    Just a thought which doesn't work "under bench":

    I usually install front loaders on a plinth, usually with a built in drawer, about ten inches off the floor.

    The extra height makes for much easier access to the contents, but you have to be careful that you don't make it too high so that the controls for the dryer can't be reached if it's stacked on top.

    Water connection is always under the tub in my projects. No need for those ugly pipes and taps to be exposed to the public after all!

    cheers,

    P

Similar Threads

  1. New bench top - WIP
    By zenwood in forum WOODWORK PICS
    Replies: 48
    Last Post: 14th June 2006, 12:58 AM
  2. Mounting a Vise to a Thin Bench
    By Knurl in forum WOODWORK - GENERAL
    Replies: 8
    Last Post: 3rd May 2006, 10:08 PM
  3. Bench Questions
    By noodle_snacks in forum WOODWORK - GENERAL
    Replies: 89
    Last Post: 13th March 2006, 11:32 PM
  4. Benches again but enlivened by some vice
    By Bodgy in forum WOODWORK - GENERAL
    Replies: 20
    Last Post: 26th July 2005, 11:56 AM
  5. the bench is comeing together - Part 1 of ???
    By Zed in forum WOODWORK - GENERAL
    Replies: 54
    Last Post: 1st March 2005, 10:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •