Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
Thread: Budgeroo
-
29th December 2014, 09:09 AM #16Senior Member
- Join Date
- Dec 2014
- Location
- Goldcoast
- Posts
- 191
Rain in Qld
Hi
With the rain setting up in Qld I think I'm going to do some Budgeroo pens x grain .. I'll add post to the pen forum. I found an old post Ring Budgeroo by Penpal .. Shows the rings from x cut .. Great pen set.
Randal
-
29th December 2014 09:09 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th December 2014, 10:54 AM #17
If you are doing Xcut be sure to epoxy in well the tube (ie sand tube, clean tube, put epoxy on tube and blank before inserting etc). Use good epoxy and leave min 24hours, do NOT even think of CA. Take fine cuts at high speed with sharp tools, any form of decent dig will blow it apart quickly . Most timbers look better Xcut in pens.
Neil____________________________________________Every day presents an opportunity to learn something new
Similar Threads
-
Ring Budgeroo
By Penpal in forum WOODTURNING - PEN TURNINGReplies: 16Last Post: 15th December 2011, 09:23 AM -
Budgeroo Burl
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 3rd May 2011, 08:27 PM -
Budgeroo Set
By Mrs Woodpecker in forum WOODTURNING - PEN TURNINGReplies: 7Last Post: 18th May 2009, 08:20 PM -
budgeroo tearout
By Stephen Walker in forum WOODWORK - GENERALReplies: 1Last Post: 8th July 1999, 11:16 AM