Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 22
Thread: detail gouge&bedan
-
6th September 2006, 01:35 AM #1
detail gouge&bedan
The recent thread by Ern about his difficulty finishing off a goblet and Skews comments about his Bedan ex-screw diver, got me thinking. As I had just recently bought a unhandled 1/4" detail gouge from Mcjings.
So this is what I came up with. The detail gouge has about 50% none gouge area, which is useless to me as a gouge. But I could grind a Bedan on the other end if I had the right sort of handle. I would then have a two in one tool.
The detail gouge is 9" [230mm] long with only 4"[100mm] of gouge area. The handle is 10.5" [270mm] with a HT bolt machined own and pressed in to the end of the 22mm aluminium hollow bar that has been machined out to 15mm to take the modified bolt and the locking screw is m6. I have as yet to finish off the handle with some sort of foam cover for comfort, probably push bike handle stuff from Kmart.
Now this could be done with any similar unhandled gouge, well, within reason. Two tools for the price of one and making good use of the extra HSS tang area.Inspiration exists, but it has to find you working. — Pablo Picasso
-
6th September 2006 01:35 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th September 2006, 08:53 AM #2
That looks very nice Hughie! I wonder what sort of handle SKEW has on his modified screw driver!!
Who are Mcjings??
-
6th September 2006, 09:09 AM #3
Good idea Hughie. Is the shaft of the gouge actually 1/4" diameter? I've never been able to follow how they measure gouges :confused:.When you find something to cover the handle with, let us know eh! I've got a couple here that need the same treatment.
-
6th September 2006, 09:45 AM #4
G'day Hughie
I had a 30mm steel bar which I used as a handle that was cold to hold and I decided to chuck it in the the lathe and knurl it. The difference it made was astonishing. It was no longer cold and also gave me a positive grip as wellCheers
DJ
ADMIN
-
6th September 2006, 10:08 AM #5Who are Mcjings??
had a 30mm steel bar which I used as a handle that was cold to hold and I decided to chuck it in the the lathe and knurl it. The difference it made was astonishing
Is the shaft of the gouge actually 1/4" diameter? I've never been able to follow how they measure gouges :confused:.When you find something to cover the handle with, let us know eh! I've got a couple here that need the same treatment.
Handle: at 22mmm its a bit small so rubber is the way to go. When I get it sussed will post the result with picsInspiration exists, but it has to find you working. — Pablo Picasso
-
6th September 2006, 12:18 PM #6
Wood. What else? I much prefer wooden handles, although I've made a few metal ones.
Hughie, I reckon that's a great idea for "portable" tools. When I do demo work it annoys the heck out of me that I have to lug around half-a-dozen tools with "generic" profiles and always seem to need one I didn't think to take. (There's nothing like deciding you won't need a particular tool to guarantee that you will! )
Replacing a couple with dual-purpose ones would mean more room in my kit for the ones I usually leave behind. Now I wonder how to make something like that with a wooden handle instead? Hmmm...
- Andy Mc
-
6th September 2006, 12:42 PM #7
Hugie, How about some of that "Plastic Dip" stuff they use to dip pliers handles in and allow to dry leaving a rubberized insulative grip.
For instance:
http://http://www.kelvin.com/Merchan...ct_Code=510056
I don't know in your special part of the world but here we can get it at most of the tool stores and Home Improvement box stores
-
6th September 2006, 01:11 PM #8Replacing a couple with dual-purpose ones would mean more room in my kit for the ones I usually leave behind. Now I wonder how to make something like that with a wooden handle instead? Hmmm...
Skew, The idea has occurred to me as well. Why not enclose the ali tube with a wooden sleeve araldite it on. Or make your usual handle up and insert a steel sleeve bored to what ever size you require. I like bigger handles ie around 30-35mm [1-1/4'' - 1-5/16''] with this the issues of dia will not be a big deal. My holding length on the handle is only 50mm long, so the rest can be clearance. Probably need about 100-125mm inserted and glued into the wood to give a good support. Real rough finish to the insert and araldite it would never move. 8 handles 16 tools etc
Hugie, How about some of that "Plastic Dip" stuff they use to dip pliers handles in and allow to dry leaving a rubberized insulative grip.
Your bloods worth bottling! I have used it several years ago and clean forgot all about it. ta muchly......Inspiration exists, but it has to find you working. — Pablo Picasso
-
6th September 2006, 02:09 PM #9Originally Posted by Hughie
-
6th September 2006, 02:10 PM #10
Hang on you lot, ya lost me. :confused:
I though a bedan was square, not round.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
6th September 2006, 02:44 PM #11
-
6th September 2006, 02:57 PM #12
Vern it used to be available via Bunnies but they took it off the shelf due OHS reasons etc. Sooooooo I gotta look around for another source.
By the way that Gidgee is a treat turn, B........y magic stuff...I 'll take a ton of it
you still need some steel blanks?
I though a bedan was square, not roundInspiration exists, but it has to find you working. — Pablo Picasso
-
6th September 2006, 03:15 PM #13
-
6th September 2006, 03:45 PM #14Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
I go with Cliff.
-
6th September 2006, 04:47 PM #15
Ok - my 'thing' just became a 'toothpick cutter' again. Is the tip shaped round or straight across on that weapon??:eek:
Originally Posted by Hughie
Similar Threads
-
Spindle and Detail Gouges
By macca2 in forum WOODTURNING - GENERALReplies: 3Last Post: 2nd June 2006, 11:54 AM -
Finishing / Detail Sander, is there a good one ?
By JackG in forum HAND TOOLS - POWEREDReplies: 6Last Post: 12th July 2005, 11:35 PM -
ryobi detail biscuit blades
By woode59 in forum HAND TOOLS - POWEREDReplies: 1Last Post: 29th February 2004, 08:38 AM -
More detail please
By Arron in forum HAND TOOLS - POWEREDReplies: 6Last Post: 20th October 2003, 07:41 PM -
Detail Sander?
By sandman in forum HAND TOOLS - POWEREDReplies: 6Last Post: 10th September 2003, 09:28 PM