Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Is It Possible ?.
-
28th January 2013, 01:49 AM #1
Is It Possible ?.
Hi All,
My 8in. - 200mm. Wire Wheel has Rounded Over, by constant use. I have had it for approx. 2 Yrs.
I have thought of using an Angle Grinder while it is Spinning, at an appropriate time of the Year, but not at the moment.
Does anybody have another Solution.Regards,
issatree.
Have Lathe, Wood Travel.
-
28th January 2013 01:49 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th January 2013, 04:04 AM #2
Is it on a fixed or removable arbor? If it's a removable one then reverse it and all the wires will cut better than new.. If it is a fixed brush then you could always use it with the drill in reverse?
My ambition is to grow old disgracefully. So far my ywife recons that I'm doing quite well! John.
http://johnamandiers.wixsite.com/johns-w-o-w-1
-
28th January 2013, 06:49 PM #3
hi issatree,
sorry but i have to say it ..........why not buy a new one
cheers smiife
-
28th January 2013, 07:53 PM #4
Clearer.
Hi Again,
I should have made it a bit clearer. It is on my 2 wheel grinder, one is the wire wheel.
I wood like to get it back to Square.
You ask my Treasury Dept. can I buy a New One.
Actually there is still a lot of meat left on the wheel.
Yes, I could reverse it, but I wood be in the same situation, as it wood still be Rounded Over.
Anyway, thanks for your Replies.Regards,
issatree.
Have Lathe, Wood Travel.
-
28th January 2013, 07:58 PM #5
Are you saying the profile is rounded and not square? A photo would help me-thinks
My ambition is to grow old disgracefully. So far my ywife recons that I'm doing quite well! John.
http://johnamandiers.wixsite.com/johns-w-o-w-1
-
28th January 2013, 11:11 PM #6China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,476
Use a course carborundum stone to true and sharpen it just like a grinding wheel