Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 20 of 20
Thread: MC900 Pulley Problem
-
7th May 2008, 01:19 PM #16
I think you will find they are actually an "M" section belt not a "A" section.
regards
David
"Tell him he's dreamin.""How's the serenity" (from "The Castle")
-
7th May 2008 01:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
7th May 2008, 01:55 PM #17
I think you may be right, just looked at a similar Grizzly lathe and it uses a M24 belt.
Might put the M23 belt back on till I get to the bottom of this, don't know whether the A22 belt will do any harm.
Anybody know the difference between A and M type belts, I assume it is the profile?
-
7th May 2008, 11:09 PM #18
A Belt Across the Ear ...
Sorry if I gave you a bum steer on the A22 belt, BS - now you've got me keen to find out which would be the best fit. The belts on my lathe so far have just been the el cheapo ones supplied by CarbaTec, and they have no code markings at all. They wear out rapidly, although I have had much longer service from mine since I disassembled the pulleys (carefully!) and polished the inner faces with wet&dry then metal polish to remove all the machining marks, etc which contribute to wear.
Surely someone amongst our fellow forumites has the engineering know-how to set us straight...Subvert the dominant paradigm!
-
7th May 2008, 11:16 PM #19
Hey, no problem, only cost $5.20. It still works, but instead of riding high on the motor pulley it rides high on the headstock spindle pulley. It is certainly a very solid and substantial belt.
Have been searching the web, but can't find any references to either the specified belt for MC900 or specs for the M23 and A22.
-
7th May 2008, 11:40 PM #20
I preferred the A22 because the lathe ran slightly slower with it which was better for larger items and I never turned at the top end anyway
Similar Threads
-
Pulley sizes vs RPM?????
By OGYT in forum WOODTURNING - GENERALReplies: 19Last Post: 20th November 2008, 12:15 PM -
Drill press pulley V Belts
By zelk in forum HINTS & TIPSReplies: 20Last Post: 12th February 2008, 12:24 AM -
which pulley moves
By tanii51 in forum BANDSAWSReplies: 16Last Post: 25th June 2006, 05:24 PM -
Wood to use for pulley?
By rotorque in forum TIMBERReplies: 18Last Post: 10th November 2005, 11:04 PM -
Stenco Pulley Question
By JDarvall in forum HAND TOOLS - UNPOWEREDReplies: 4Last Post: 16th August 2005, 08:22 AM