Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    May 2008
    Location
    BELL POST HILL, 3215
    Age
    87
    Posts
    2,332

    Default Rhynowet Red Line Sandpaper.

    Hi All,
    A few threads ago, the question was asked, which Sandpaper was to your liking.
    Well I have been given a few sheets of this Rhnyowet Red Line, Wet & Dry Paper.
    TTIT or Vern, as some of us know Him, stated that this was the best stuff ever.
    Well I can now say TTIT is on the right track. It really preforms well.Best I've used.

    The sheets are 11in x 9in. so that makes them American.
    I cut across the 9in. end x 1 1/2in. wide, then cut that in half & folded it again to use.
    I have made 5 Turnings, & using this Paper, & as Vern stated it does not clog up like our blue/yellow Hermes.

    This stuff is superb, beyond belief. It certainly blew me away.

    Problem ; Each Grit comes in a 50 sheet pack, & I visited 5 Smash Repair Shops, but nobody had heard of this stuff. As I mentioned to Vern, it must be a QLD. thing.
    I also went to Repco - Blackwoods - A Welding Shop - Preston Motors. They knew nothing of this Paper.

    Go to Google, print, " Indasa, Rhynowet Red Line " & see what you make of it.
    Even the price seems right even in US $'s

    There must be some way we can obtain this Paper. The only Suppliers are in WA & QLD. Well that's all I could find any way. Over to all of you, who know better than I.
    Regards,
    issatree.
    <input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2009
    Location
    Pluto
    Posts
    72

    Default

    G'day mates,
    I thought that ran a bell. I checked and I have been using it in roll form. It is VERY good.
    I checked on ebay (USA) and it is available in almost any grit for about $15 US for a pack of 50.
    (Make sure you check "title & descriptions" when doing a search)
    http://tinyurl.com/kldq6l
    The sellers do not show shipping but I went to www.usps.gov and put in 10 pounds.
    Shipping is high, $42, but 10 pounds should cover five packs of 50. There may be less expensive shippers (such as Fedex or UPS) as my brother puchases many items from ebay Australia and does not pay near than for items from you to the USA. If you had a small group (5?) and ordered multiple grits you could divide the packets and shipping cost.
    I did not do a general google search but there should be other suppliers online as ebay is not always the least expensive.
    Rolls (2) are just to the left of top row of tools, The best I remember these were $8 each for 75 meter and 2 1/2 inches wide.
    Mike

  4. #3
    Join Date
    Jul 2005
    Location
    Flinders Shellharbour
    Posts
    5,724

    Default sandpaper

    Inspiration exists, but it has to find you working. — Pablo Picasso


  5. #4
    Join Date
    May 1999
    Location
    Tooradin,Victoria,Australia
    Age
    73
    Posts
    11,918

    Default

    Link not working Hughie.

  6. #5
    Join Date
    Jul 2005
    Location
    Flinders Shellharbour
    Posts
    5,724

    Default

    Must be gone??? could only find ebay-usa

    http://cgi.ebay.com/ebaymotors/RHYNO...11610005r22725
    Inspiration exists, but it has to find you working. — Pablo Picasso


  7. #6
    Join Date
    Dec 2001
    Location
    Melbourne
    Posts
    366

    Default

    Found this site while googling rhynowet:

    http://www.2sand.com/servlet/the-San...scs/Categories

    Prices look good but I don't know what shipping is like.


    Cheers,
    Evan

Similar Threads

  1. Well done, Sandpaper Man
    By AlexS in forum HAVE YOUR SAY
    Replies: 5
    Last Post: 6th April 2009, 04:09 PM
  2. A box of sandpaper????
    By BoomerangInfo in forum WOODTURNING - PEN TURNING
    Replies: 10
    Last Post: 13th March 2009, 11:07 AM
  3. Sandpaper
    By Chumley in forum WOODWORK - GENERAL
    Replies: 6
    Last Post: 11th February 2008, 09:16 PM
  4. Sandpaper?
    By goodwoody in forum FINISHING
    Replies: 10
    Last Post: 12th September 2007, 09:30 AM
  5. Sandpaper
    By gabacus in forum BANDSAWN BOXES
    Replies: 18
    Last Post: 1st August 2007, 10:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •