Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Sanding tree
-
7th June 2006, 12:10 AM #1
Sanding tree
I know this has probably been done a thousand different ways already but I always get a buzz out of saving something, however small, from the landfill.
I have all my chisels on a rack in front of me at the lathe and the other often used tools on a smaller rack below the headstock so that I rarely have to turn away from the lathe - UNTIL I start sanding!:mad: Got sick of turning around to the bench to my divided box full of sandpaper 100 times a day.
The clips are just pieces of palletizer banding cut 60mm long with a hole drilled one end to suit whatever bolt or brooker rod you can find (I used 5/16") and a bend on the other end about the width of my pliers. Cut some tubing into lengths about 30mm long for spacers (mine are only 24mm - a bit shortish). I thought I was using old copper water pipe until I hit it on the wire wheel - what a waste of brass pipe I didn't know I had!!!!!:eek: Being a molly-dooker, the hole my indexer pin bolts in to is just the right position for me but you could mount this anywhere convenient on your lathe or bench. Makes stepping through the grades so much easier than before.
-
7th June 2006 12:10 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th June 2006, 01:48 AM #2
and an interesting idea, something I would have never thought of. Some lateral thinking, you can never get enough of it.
hughieInspiration exists, but it has to find you working. — Pablo Picasso
-
7th June 2006, 02:05 AM #3Woodturner
- Join Date
- Jan 2006
- Location
- Lake Seminole, Georgia USA
- Age
- 79
- Posts
- 1,111
TTIT, thanks!, that is a pretty cool organizer. I presume that the finest abrasives are on top. I would not want to be sanding along at 600 grit, and have a huge scratch appear from a grain of 150 grit that fell down onto the 600 papers.
-- Wood Listener--
-
7th June 2006, 09:19 AM #4
What a brilliant idea!!!!!
Cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
7th June 2006, 09:58 AM #5Originally Posted by Gil Jones
-
7th June 2006, 11:42 AM #6
That's a wonderfull bit of lateral thinking.
have to give you a greenie here.
.p.t.c
-
7th June 2006, 04:21 PM #7
Nice idea! Thanks for sharing.
<Insert witty remark here>
-
7th June 2006, 06:12 PM #8
Good one
Great idea TTIT - as said before, thanks for sharing it.
Cheers,
Andy
"There's more wisdom gained in listening than in speaking"
-
7th June 2006, 06:35 PM #9GOLD MEMBER
- Join Date
- Oct 2002
- Location
- NSW
- Posts
- 1,610
Cool!
I'd also like to see a pic(s) of your indexer pin in position, as your lathe looks very much like my MC-1100, and I've been wondering about indexing (seen some home-made ideas on various web pages.)
I also considered mounting my lamp on the headstock - did yours come complete with all the holes, or have you been drilling and tapping in your spare time?
Cheers,
Andrew
-
7th June 2006, 09:30 PM #10
It's certainly one way of solving a problem, but it's not lateral thinking.
If it was lateral it would be horisontal or posibly at an angle.
This is vertical thinkingAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
8th June 2006, 09:05 AM #11
Sandpaper EXTENDER to boot!!!!
Originally Posted by arose62
Found another advantage of the sandpaper tree last night I keep a line from the air-compressor handy when I'm turning to clear hollow forms and clean dust from pieces before I apply a finish. Discovered that the clips hold the paper securely enough to allow me to give the paper a blast while I'm at it and get a bit more life out of it - cool huh!
Similar Threads
-
Sanding between coats of lacquer
By Richardwoodhead in forum FINISHINGReplies: 12Last Post: 9th September 2005, 02:23 PM -
A different type of tree - very clean joke
By Wood Borer in forum WOODIES JOKESReplies: 6Last Post: 24th June 2005, 04:50 PM -
Tool Review – Sandboss Pneumatic Sanding Drums
By Bob Smalser in forum HAND TOOLS - POWEREDReplies: 2Last Post: 9th October 2004, 09:15 AM -
Removing a tree - neighbour gone mad - advice appreciated!
By Eastie in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 12Last Post: 29th January 2004, 11:28 PM