Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Old turning tools
-
28th May 2006, 10:14 PM #1Senior Member
- Join Date
- Jan 2004
- Location
- Australian (in exile) - UK
- Posts
- 468
Old turning tools
I'm going back to the UK in a few weeks (first time in 18 years), my dad inherited my granddads wood turning gear who taught me wood turning almost 30 years ago. Dad never caught the enthusiasm of wood turning and the tools have been rusting in a side shed ever since (lathe was sold).
Since then I've emigrated (20+ years ago) and have continued the craft/madness with far lighter gear. It has been so long that I can't remember how these tools were to use, but I know they were much heavier/thicker.
My question is (sentiment aside) will those 1950-60's tools be worth bringing back from a usability point of view, I am prepared to make my own judgment and pay the excess baggage but wanted other opinions, you can rest assured that they were state of the art for their day, granddad appreciated and could afford quality.
Cheers
Dave
-
28th May 2006 10:14 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th May 2006, 10:18 PM #2
Chances are very high that if the tools were of high quality back then, then they would still be very good tools to use once they are cleaned up.
Have a nice day - Cheers
-
29th May 2006, 06:18 AM #3
They are probably carbon steel and will need to be sharpened far more frequently than the High Speed Steel of todays tools. If the shipping is very much of an expense, and you really desire to get into turning as something more than a passing phase, I would advise purchasing your own HSS tools from a woodturning supply source.
If sentiment is a factor, as in the tools I inherited from my now deceased father, then pay the shipping and keep them for sentimental reasons.A bulldog can whip a skunk, but is the stink worth it?
-
29th May 2006, 09:06 AM #4
Bring 'em back. You'll be glad you did, and won't have reason to regret not doing so, later.
OGYT
-
29th May 2006, 10:01 AM #5
I LOVE heavy tools...
Get them and clean them up. Takes little time and while you will have to resharpen more often, it will be worth it.
Cam<Insert witty remark here>
-
29th May 2006, 10:32 AM #6Senior Member
- Join Date
- Jan 2004
- Location
- Australian (in exile) - UK
- Posts
- 468
I have been turning on a quite regular basis for about 25 years so the phase is taking a long time to pass
So is the reason that todays tools are much thinner and lighter down to the cost of HSS? you wouldn't think it would be that much more expensive.
I think I'll probably bring most of the back but from memory there were maybe 30 chisels (time has a habit of exaggerating these things though) so it might cost a bit.
Cheers
Dave
-
29th May 2006, 11:03 AM #7Originally Posted by davo453Zed
-
29th May 2006, 11:15 AM #8
old tools, my two bobs worth
[
quote=Zed]surface mail will fix that[/quote
Davo,
Zed is right, I have sent from the UK several heavy packages to Oz .It was cheap and a good service. Also I agree with OGYT by keeping them there will be no regrets later.
Consider this; If they are old they will most likely be of a very good quality and a very good brand.[if not famous ] Maybe HSS but not likley and so there fore carbon steel. But the age of them may make then a collectable item.
hughieInspiration exists, but it has to find you working. — Pablo Picasso
-
29th May 2006, 03:44 PM #9Senior Member
- Join Date
- Nov 2000
- Location
- Cle Elum, Washington, USA
- Posts
- 117
Ship em back. Nothing is as special as Family, and any ties to that should be treasured!
"Always cutting corners...!"
-
29th May 2006, 05:40 PM #10Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Collectible eh?
I've got an old set of Sorby carbon steel turning tools. Will accept offers over $500 but be quick
They came in handy when I started turning seriously - spent about a month practising sharpening on a cheap GMC wet wheel without a jig. The edge lasted about 60 seconds on our hardwoods.
But if they're old and useless they must be a collectible.Cheers, Ern
Similar Threads
-
Turning Tools
By Barry_White in forum HINTS & TIPSReplies: 21Last Post: 21st January 2008, 08:03 AM -
sorby turning tools
By sbranden in forum WOODTURNING - GENERALReplies: 8Last Post: 18th April 2006, 03:25 AM -
What bowl turning tools to buy
By pwill in forum WOODTURNING - GENERALReplies: 10Last Post: 10th January 2005, 10:07 AM -
Sharpening Crown Turning Tools ?
By bocon007 in forum WOODTURNING - GENERALReplies: 22Last Post: 9th May 2004, 03:03 PM -
need help with bowl turning tools
By Shawn in forum WOODTURNING - GENERALReplies: 1Last Post: 10th May 2000, 08:26 AM