Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
17th December 2008, 06:00 PM #1
Cupboard doors from leftover Blackbutt T+G flooring
Howdy,
I wish to make some cupboard doors for an outdoor BBQ area (all under cover, no direct sunlight, no rain [unless the house is tipped on its side]), but exposed to the world none the less.
I have a few m2 of 80x12mm tongue and groove Blackbutt flooring which I wish to use (it has the small rebates cut into the back to assist in reducing cupping).
I have two questions;
1) What would be the best method of physically constructing the doors. Glue on ply? Make a frame for the rear (top, bottom, sides, and a horizontal in the middle) and glue/nail/screw onto that?
2) What would be the best design to deal with expansion? I don't wish to frame the face of the door all the way around, but instead to have the planks running vertically with a routed edge (like a rounded pencil edge or similar).
Any advice appreciated.
Cheers!!
Read the full thread at RenovateForum.com...
-
17th December 2008 06:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Wanted: 2nd hand Blackbutt flooring
By BruceD in forum TIMBERReplies: 1Last Post: 27th February 2008, 09:52 PM